A very common call to our water bore Perth service hotline (1300 734 300) is along the lines of “my bore runs but no water” or “my pump runs but no water”. Firstly, before anything, our advice is always to turn it off so the pump is not running. Turn the reticulation controller OFF and if there is a bore over-ride switch turn that OFF as well. In newer Perth bore pump installations there should be a circuitbreaker in the meter box labelled “bore” or “pump”. Turn that OFF as well. In older Perth bores it may be a fuse instead. In some installations it may even be labelled reticulation. No bore pump should run without water or consequential damage may result.
Their are several causes. Click here for more details or Call us on Perth 1300 734 300 and we’ll fix the problem pronto