Wanneroo Water Bore

Russell is one of our specialist drillers for shallower water bores in the greater Perth metropolitan area.

He and his team take a lot of pride in their work so they were pretty pleased with the ‘gusher’ they drilled in Wanneroo recently.

Water Bore in Wanneroo

Wanneroo is generally pretty shallow for a water bore and the bore pictured was 18 metres deep with the bore pump set at 10 metres.

The moment of truth is before even the pump is installed when compressed air is forced down the borehole to develop up and prove the supply.

If you live in Wanneroo and would like to save money and have the best garden in the street call us on 9246 0111.

Water Bore Munster

This is a gusher we recently drilled for a client in the southern Perth suburb of Munster. Munster is located in the City of Cockburn.

As you can see in this video we have drilled and cased the water bore. We are pumping compressed air down the hole to remove drilling fines and muds. This process is also known as air developing.

Air developing water bore in Munster

The static water level was only at 3 metres so we drilled to 11 metres and set the submersible bore pump at 5 metres.

If you live in Munster or anywhere is Cockburn call us on 9246 0111 if you are considering a water bore and would like to save money.

if you would like to learn more about getting a water bore http://www.virginbores.com.au

Fused Submersible bore Pump Perth

This is not exactly what Tom expected when he winched out a fused submersible bore pump in Bassendean.

The organic mass is a root mass. We think whoever drilled the original bore possibly configured it with slotted bore casing above the static water level causing fibrous root ingress chasing an easy route to water.

We replaced the pump and made the client aware he may have future root problems

Don’t forget many household insurance policies have fusion cover for electric bore pump motors. We can advise you when you call us on 9246 0111.

If your submersible pump is not working it may be fused. Call us on 9246 0111 and we can work out the problem and send the right person for the job. If you would like to read more on pump repair and fusion in Perth https://virginbores.com.au/perth-bore-pump-motor-repair-and-service/