There are several places in the Perth metropolitan area that are quite elevated and require a deep submersible water bore.
This water bore we connected in Doubleview is a good example. We drilled to 58 metres through mainly limestone and sand. We connect the water bore to existing reticulation and the electrical connections have already been done. In this case we are consolidating the client’s two existing controllers into just one. This is because we have far more flow from the bore. The green box will be place over the hole and it will be covered in grass.
We have installed a 1.5 K submersible pump which is delivering about 80 litres a minute.
Other parts of the Perth metropolitan area that require deep submersible bores are near the water tower in City Beach, the elevated parts of Kardinya and Sinagra near Wanneroo.
Virgin Water Bores are very experienced in drilling deep submersible water bores. If you are in an elevated position and would like to save money with a water bore give us a call on 92460111 or check out our website HERE
We automate old well bores to start from modern reticulation controllers and replace manual gate valves with automatic solenoid valves. Our specialist team automated this old well in High Wycombe. Last week we automated old style wells in High Wycombe, Waterford, Bentley and Karawara. Sing out if you want help automating your bore and give Troy a call on 92460111.
Enjoy holidays away without worry. We service and repair anything to do with bores or retic systems all over Perth.
Craig, one of our retic servicemen, had fun at this job in Wanneroo. He located and fixed this master solenoid valve at this Wanneroo home.
Surprisingly common to also find such a corroded manual gate valve that isolates the retic from the mains water supply. Often just near the water meter. Nice work Craig!
We service reticulation and sprinkler systems from mains water or water bores. If you are in Wanneroo or the surrounding areas of Sinagra, Heathridge or Wangara we repair and fix bores and reticulation daily. Our mobile teams will be in the area and if we can help you call on 92460111 or go to our website HERE
We do see some picturesque scenes in some beautiful Perth gardens.
Underneath this tin lid in a lovely Nedlands garden is an old style well. The ladder goes down about 15 metres to a pump. One of our specialist team diagnosed that the pump had failed.
Given the age and condition the best solution here is to start again with a new submersible bore and stainless steel pump. The garden will soon be enjoying fresh groundwater again.
If you have an old style well in Nedlands or the surrounding areas call one of our specialist team on 92460111. We can repair or talk to you about a modern submersible water bore so you can continue saving on your water bill.
Albert phoned us with a broken bore at his Wembley Downs home.
Our bore specialist electrician attended and found his 3 phase 1.5 KW motor was fused.
We supplied and installed a new motor for the 65 metre bore. We also did a heat shrink.
If you have an issue with your bore in the Wembley or Wembley Downs area, we have a bore electrician and repair team. Call us on 9246 0111.
We have installed a submersible pump in a 20 metre bore in the front yard of a new house being built in Cloverdale.
We installed a 1.1 kilowatt submersible pump and the owner will connect to a new reticulation system in their new Cloverdale home.
Hard to imagine that we have thousands of these pumps up to 70 metres below ground all around Perth.
This Cloverdale water bore will be under the driveway in this southern Perth suburb near the airport.
If you would like to consider a water bore in the Cloverdale area call 92460111 or have a look at our website Virgin Water Bores
If you would like a new submersible water bore in the Cloverdale, Kewdale, Carlisle or Rivervale area we have drilled many water bores in the area. We drill new bores, repair water bores, install new reticulation and repair reticulation.
There was just a small pile of sand from drilling this 18 metre submersible water bore in Rossmoyne.
It was drilled with the portable drilling rig in the Rossmoyne backyard because of restricted access. Groundwater was encountered at only 4.5 metres down.
Here we see the bore being flushed as groundwater is forced to the surface by compressed air alone. At the same time the “mud tank” is being given a clean. It was used for the recirculating drilling fluids during rotary mud drilling.
The next thing we will install the submersible pump and connect to the retic system.
We will also specialist in repairing your Rossmoyne water bore or reticulation
If you live in Rossmoyne or surrounding areas like Shelley or Willeton call 92460111 or check out our website HERE