Tag Archives: gear drive sprinklers

Gear-drive sprinklers for bore 

A great sprinkler to use with a water bore to irrigate large areas of lawn is a gear drive sprinkler.

A gear drive sprinkler or rotors are economical, low maintenance and are quiet when in operation.

Shown here there are 6 gear-drive sprinklers coupled to a 1.5 KW submersible pump. When fed from a water bore these gear drives are ideal for large properties such as this 2.5 acre property in the Perth suburb of Two Rocks.

Not only do we service and repair bores and reticulation systems but we also install reticulation system. If you want help with service design or install of reticulation in any Perth suburbs or inquire on line HERE

Reticulation system Upper Swan

 

It puts a smile on our face to finally turn on the 4,000 square metres of irrigation we have just installed around this house in Upper Swan.
Gear drive sprinklers are covering the lawn nicely. This is all part of a much larger property. We have installed a 1.5 kw submersible pump in the recently drilled eight inch bore operated by float switches this fills a near-by 12,000 gallon tank.

Pumping from the tank to the irrigation system we have installed a Grundfos Vertical multistage 4KW centrifugal pump. The pump has amazing grunt to pump to the far paddocks and horse troughs and is run by a convential reticulation controller.

Reticulation for Upper Swan retic job
Upper Swan Reticulation
Grundfos pump
Vertical multistage centrifugal pump

The whole project was completed by our installation arm Virgin Bores. If you would like talk to our expert team about a big bore and reticulation project call 9246 0111 or if you need a large reticulation job done get more information HERE