Tag Archives: perth

Can I get a tap for my Garden Bore?

If you have a submersible garden water bore in the Perth Metropolitan area, we can install a tap off your bore. A tap from a water bore commonly has very high volume that is good for hand watering.

Bore Tap

Jean had a tap fitted to her garden bore and was very pleased with the results

If you would like to find our more about getting a tap fitted to your garden bore in the Perth and Peel region call 9246 0111 and we will run you through what is involved.

Water Bores Perth

Virgin Water Bores love looking after their customers and love 5 Star reviews.

Five Star Google Review

“The team at Virgin Bores were simply fantastic and good people to deal with. 

From David, who made the quote process painless and kept us informed along the way, to the drilling crews and Craig the electrician – they are genuine people who care about their work and obviously felt a lot of loyalty and respect for the company. When things got a little stressful towards the end, Troy came through with great communication and responsiveness. 

Highly recommend this family feel company”

Contact Virgin Bores

Save money and have the best garden and the greenest lawn in the street and call Troy 9246 0111 or visit the website here.

Virgin Bores: Water Bores Perth | Bore Drilling and Pump Installation …

Drilling Rig Perth

Drilling new Water Bore Perth

Green access lids at the top of submersible water bores.

We drill modern submersible water bores in the Perth metro area from 18 metres and as deep as 40 metres.

Drilling the submersible water bore normally takes about a day and as you see here the top of the bore is covered by a green access lid just surface level of the ground so it can then be covered by lawn. Invisible!

We can also drill in a driveway and cover.

Important to keep a record of where the water bore is located just in case it needs repair in the future.

Call Troy on 9246 0111 if you would like to save money on your water bill with a modern submersible water bore,

Automate Old Bore Perth

We are presently automating the reticulation systems in two adjacent Duncraig homes.

They share an old style bore which had been operated by a manual switch. So far we have installed a separate automatic reticulation controller on each property and are replacing the old manual gate valves with automatic solenoid valves (3 solenoids on one property and 5 on the other).

The retic system at one house hadn’t been used for 20 years so fingers crossed when we give it a well overdue service and some TLC!

We are up for a challenge,

If you need help automating your old style well or modern submersible water bore call Troy on 9246 0111.

Can I have a garden tap with my submersible water bore?

Most commonly Perth water bores are connected to the clients existing reticulation. We are able to install a manual tap if requested. The bore tap is usually high pressure and can be used for hand watering and numbers of other things.

People need to realise its only irrigation quality water, not “tap” drinking quality water from the scheme.

Handy bore tap

Can I have a tap from my bore? Sure you can.

We have installed 2 bore taps this week.

Above, Tom installed a brass tap and pressure release valve to this new 22 metre deep submersible bore we just drilled in Morley.

Tom also installed another one to this new 29 metre submersible bore we just completed in Quinns Rocks(above). We install a larger than normal tap to fit a bigger 20mm hose to accommodate the extra flow from a bore.

If we can help you call us on 9246 0111.

Submersible Bore Pump Replacement Carramar

If your bore pump needs replacing and you live in Carramar or the surrounding suburbs of Wanneroo, Joondalup or Neerabup we can help you on 9246 0111.

Replace Water Bore Pump Perth

Submersible pumps are very reliable and normally don’t require any pre-emptive maintenance or repair. However, on occasion, they may be susceptible to lighting induction or fusion. It is best to get a specialist bore pump technician or electrician to repair or replace your submersible pump. It will save time and money when you do the job properly. We can also advise on whether any bore pump motor damage may be covered in your household insurance if you have fusion coverage.

Replace Water Bore Pump Carramar

Here we are replacing a 1.1 kW single phase submersible pump in the Perth suburb of Carramar. We also replaced 28 metres of downhole electrical cable with special rubberized bore cable and stainless steel draw wire in this 34 metre deep Carramar garden water bore.

Our specialist bore electrician will then return to install a junction box and test. Once the pump is up and running we will connect back to the reticulation and make sure all is OK.

If your Perth water bore and reticulation needs repair or replacement call us on 9246 0111 or get more information on bore repair HERE

Crystal Clear Bore Water

“That’s the good part of it…that’s your bore water”

Virgin Bore’s most experienced driller, George, is always pleased to see the first rush of bore water after drilling a water bore. Virgin Bores is always happy to deliver a plentiful supply of crystal clear water for their Perth customers.

Immediately after drilling a garden bore to the required depth, the bore is air developed as seen here. Even before the submersible pump is installed. Most garden bores drilled in Perth are drilled by the rotary mud method.

 

 

To clean out the drilling muds and “fines” we pump compressed air down inside the bore casing. At this stage air alone forces the groundwater up to the surface.

If you are considering a water bore and live in the greater Perth metropolitan area call on 9246 0111 or get a BORE QUOTE HERE

If your water bore in Perth needs maintenance, service or repair call on 9246 0111 or BOOK A BORE SERVICE HERE

 

Supply and Install Tap and PRV

Tap and PRV Brabham 

Virgin Water Bores recently drilled, cased, developed and gravel packed a 18 metre submersible bore in the Perth suburb of Brabham.

A .75 kW submersible motor was used for the Brabham water bore.

In the next few days after the drilling the electrician and reticulation team connect the new water bore to existing reticulation and bore box.

Water bore Brabham 

As pictured, we also supplied and installed a tap and pressure release valve.

If we can help you with water bore repair in Brabham or a new water bore in Brabham, call Troy on 9246 0111 or find out more here

DID YOU KNOW – the Perth suburb of Brabham is in the City of Swan. It was formerly known as Henley Brook. It was gazetted in 2011 and was named after Australian Motor Racing Champion Sir Jack Brabham (Source: Wikipedia)

Repair Shared Bore Ocean Reef

Driving around Perth at the moment you will see people back in their front yards pottering, weeding and checking their water bore and reticulation sprinklers.

David in Ocean Reef has a shared modern Sumoto submersible water bore with his neighbour.

He called us on 9246 0111 when his bore was not starting on his side but his neighbours was working. They have a Sumoto submersible pump.

We sent out our specialist bore electrician, Dave.

Fixed water bore by replacing fuse in retic box
Fuse in retic controller replaced

The 1 amp glass fuse in the reticulation controller was blown. He replaced and all is working OK.

We suspect there may be an intermittent fault in the 24 volt start wiring of the shared bore coming from the neighbours retic controller

If your Perth water bore or reticulation needs repair call us on 9246 0111 or go to our website here

Water Bore Floreat

We repair and install many water bores and reticulation systems in the Floreat area.

Here we have drilled a water bore and our man Jack returned to connect to the existing reticulation system.

Call for a Water Bore quote 9246 0111

If you live in the Floreat area and would like to save money with a water bore call Virgin Water Bores on 9246 0111 or go to the website HERE

Most new bores we drill in Floreat are between 18 metres and 30 metres in depth depending on the properties elevation. Typically new submersible bores in Floreat cost between $3400 and $5500 depending on depth and size of submersible pump chosen.

Connect retic to new water bore
Connecting the new bore to the existing retic system is usually all part of our job.

Water Bore New in Floreat
We disconnect the existing retic system from mains water before we plumb it in to the new water bore.

Water from new Floreat Water Bore
Virgin Water Bore’s customer now has their bore up and running