Most submersible water bores are drilled between 18 metres and 60 metres deep depending on the depth to groundwater in Perth. Call 9246 0111.

Most submersible bore holes in Perth are drilled by the rotary mud method. After the desired depth has been drilled the drill bit and the metal drill rods are retrieved. Next the permanent bore casing is lowered into the bore hole in 6 metre lengths which are glued and screwed together.

In this video you will see the Class 9 PVC bore casing being lowered into the freshly drilled bore. The first 6 metres is slotted casing to allow the ground water to flow in. Inside the bore casing will be suspended a submersible pump.

If your interested in a water bore in Perth call 9246 0111 or read more about drilling a water bore at your home in Attadale or any Perth suburb HERE