Tag Archives: submersible water bore

Water bore North Beach

George and the drilling team did a great job getting the drilling rig positioned at this job in North Beach.

The team drilled a 30 metre modern submersible water bore for this North Beach customer and got a plentiful supply of crystal clear water.

Difficult access on a sloping driveway drilling into a small walled garden bed. Way to go George!

All was tidied up and just the 100 mm bore casing left sticking out of the ground and a small pile of drilling waste sand on the verge.

Next we will cut down the bore casing to under the surface level and install the submersible pump.

If you have been at home and been thinking about a water bore, now is a great time. Call us on 9246 0111.

Water Bore Munster

This is a gusher we recently drilled for a client in the southern Perth suburb of Munster. Munster is located in the City of Cockburn.

As you can see in this video we have drilled and cased the water bore. We are pumping compressed air down the hole to remove drilling fines and muds. This process is also known as air developing.

Air developing water bore in Munster

The static water level was only at 3 metres so we drilled to 11 metres and set the submersible bore pump at 5 metres.

If you live in Munster or anywhere is Cockburn call us on 9246 0111 if you are considering a water bore and would like to save money.

if you would like to learn more about getting a water bore http://www.virginbores.com.au

Fused Submersible bore Pump Perth

This is not exactly what Tom expected when he winched out a fused submersible bore pump in Bassendean.

The organic mass is a root mass. We think whoever drilled the original bore possibly configured it with slotted bore casing above the static water level causing fibrous root ingress chasing an easy route to water.

We replaced the pump and made the client aware he may have future root problems

Don’t forget many household insurance policies have fusion cover for electric bore pump motors. We can advise you when you call us on 9246 0111.

If your submersible pump is not working it may be fused. Call us on 9246 0111 and we can work out the problem and send the right person for the job. If you would like to read more on pump repair and fusion in Perth https://virginbores.com.au/perth-bore-pump-motor-repair-and-service/

Supply and Install Tap and PRV

Tap and PRV Brabham 

Virgin Water Bores recently drilled, cased, developed and gravel packed a 18 metre submersible bore in the Perth suburb of Brabham.

A .75 kW submersible motor was used for the Brabham water bore.

In the next few days after the drilling the electrician and reticulation team connect the new water bore to existing reticulation and bore box.

Water bore Brabham 

As pictured, we also supplied and installed a tap and pressure release valve.

If we can help you with water bore repair in Brabham or a new water bore in Brabham, call Troy on 9246 0111 or find out more here

DID YOU KNOW – the Perth suburb of Brabham is in the City of Swan. It was formerly known as Henley Brook. It was gazetted in 2011 and was named after Australian Motor Racing Champion Sir Jack Brabham (Source: Wikipedia)

Casing a Submersible Water Bore Perth

 

Most submersible water bores are drilled between 18 metres and 60 metres deep depending on the depth to groundwater in Perth. Call 9246 0111.

Most submersible bore holes in Perth are drilled by the rotary mud method. After the desired depth has been drilled the drill bit and the metal drill rods are retrieved. Next the permanent bore casing is lowered into the bore hole in 6 metre lengths which are glued and screwed together.

In this video you will see the Class 9 PVC bore casing being lowered into the freshly drilled bore. The first 6 metres is slotted casing to allow the ground water to flow in. Inside the bore casing will be suspended a submersible pump.

If your interested in a water bore in Perth call 9246 0111 or read more about drilling a water bore at your home in Attadale or any Perth suburb HERE

Scarborough bore and retic

Drilling water bores in Coastal Scarborough
We have drilled many water bores in the Scarborough area

We drill, install, service and repair water bores in the Scarborough area and the surrounding areas of Woodlands, Doubleview and Innaloo.

Virgin Bores has drilled many water bores in the Scarborough area. This picture was taken in the park next to the Doric Street shops. The depth to water at the centre of the park is 20.3 metre and and we would generally drill 12 metres into water. The water bores in the Scarborough area can range from 18 to 60 metres.

We can also repair your Scarborough water bore. We also have an experienced reticulation team who can look help you design a new reticulation system for your Scarborough home. are local we can attend promptly and will solve all sorts of reticulation problems in an efficient and timely manner.
Give us a call on 9246 0111 or check out our website HERE

Water bores in Two Rocks

We have vast experience in drilling and servicing water bores in the Two Rocks area and surrounds over the last two decades.

We have drilled dozens of bores stretching from Yanchep and Two Rocks across to Seatrees Estate and  Breakwater Estate. Bores in the area range from some shallow ones right near the coast at Yanchep and Two Rocks typically around 18 metres and up to 60 metres further inland near Seatrees Estate and Breakwater Estate.

In the smaller residential blocks in Two Rocks we normally install 1.1kw submersible pumps perfect for normal home gardens. In the 5 acre blocks over at Seatrees and Breakwater we would normally instal a 1.5 or 2.2 kw pump to give closer to 150 litres per minute.

All new drilling and installations are handled by our new Bore team at Virgin Bores.

For bore service and repair call Troy on 0408 454 130 or if you live in the Two Rocks area and you would like to discuss a submersible water bore look HERE

Water bores drilled and repaired in the Two Rocks and Wanneroo areas
Over 15 years we have drilled and repaired many water bores in Two Rocks

New water bore Mount Lawley

We have drilled a lot of successful water bores in the Mount Lawley area over the years and we know the area well.

Next week we will drill another water bore in Mount Lawley itself right on the hill. The water bore is an important part of  new landscaping at the property.

The start of water bearing ground at this Mount Lawley property is around 26.8 metres below ground.  We will drill to 39 metres, 12 metres below the water table to help ensure optimal supply.

We have been drilling and repairing water bores in the Mount Lawley for over 16 years.

We have specialist repairers and bore electricians ready to help with any bore service or repair issues with any brand of bore or bore pump.

Check out the Virgin Bores website HERE or phone on 9246 0111 and chat with Dave or Troy

Drilling a water bore in a new garden in Moutn Lawley
Planning for drilling a modern submersible bore in Mount Lawley

Marmion submersible water bore

 

​​This week we are drilling a new submersible water bore in Marmion.

The team normally make an early start. This video was taken at 8am and they had already drilled 20 metres of a 29 metre submersible water bore in Marmion.

The water table was reached at 18 metres. This submersible garden bore is for a new house and access restrictions mean we are drilling at the very front edge of the as yet unlaid sloping driveway.

We specialise in coastal suburbs like Marmion, Hillarys, North Beach and Trigg. We also service and repair water bores in Perth’s coastal suburbs. Get in touch if you would like a new water bore HERE  or phone David on 9246 0111

IMG_1017

New water bore Southern River

We are going to be drilling at this property in Southern River. We have a lot of experience in the area and can be contacted on 9246 0111.

We have drilled a lot of water bores in the Southern River area and know the conditions well. The depth to water at this property in 4.3 metres and we would drill 18 to 20 metres into water.  The ground conditions in Southern River can vary with interspersed layers of clay which can inhibit ground water. For this reason we often allow extra slotted casing, extra gravel packing and extra air developing to help compensate.

Southern River home with new submersible bore
Location of new water bore in the Southern River area

We would use a good quality Italian stainless steel pump, a 1.1 kw motor coupled to a 12 stage wet end.

We attend the property to talk to our client about their requirements and about where to drill their water bore. We aim to drill close to the metre box to minimise costs to the client. Pictured is where we are looking at drilling at this property.

We also service and repair water bores, bore pumps and reticulation systems in Southern River and surrounds including Piara Waters.

If you are in the Southern River or Piara Waters and would like to discuss a water bore for your home call David on 9246 0111 or look at our website HERE.