Tag Archives: perth bore

Automation of Old Well

This old well with a tin lid has been running without a retic controller. We are going to automate this old well in Morley.

We will fit an automatic reticulation controller and interface to the clients existing on/off switch. We then replace the manual bore valves (in the foreground of the picture) with automatic solenoid valves.

Hey presto, it will come on automatically and switch from front to rear lawns and it is fully programmable.

If we can help you with a similar issue or anything to do with your bore or reticulation contact one of our friendly team on 9246 0111 or go to our website HERE

Automate old well
Automate old we

Old Well New Submersible Pump

This old well in Myaree has had a carport built over the top. We are looking at converting it to a submersible pump which will be accessed by a hatch in the new liquid limestone floor. Call 9246 0111.

Replace Myaree well with old tin lid
Old style well in Myaree to be replaced

If have been in the business nearly 20 years and have extensive knowledge in Myaree and the surrounding areas of Melville and Booragoon.

If you live in the Myaree area and have an old well and would like to consider a modern submersible water bore call us on 9246 0111 or go to our website HERE

Bore Repairs Claremont

We have just repaired a water bore in Claremont for an elderly client.

We talked to the customer on the phone and identified the fact we needed to send our specialist bore electrician, Dave. He found the submersible pump motor was not working and certified it as fused so the client could claim on her insurance. Her insurance policy covered pump motor fusion. It was quite deep for a Claremont bore so we had to winch the pump up over 30 metres.

We install and repair water bores in the Claremont area and surrounding suburbs of Nedlands and Dalkeith.

Call us anytime on 9246 0111 or book a bore service here 

 

D.O.L. bore starter
3 phase bore pump starter

Perth Bores.

Important to deal with ADIA members
Important to deal with ADIA members.

Perth bores are our passion. Because we install and repair  bores AND reticulation systems we are Perth’s go-to guys for anything to do with water bores or watering systems. We’ve been drilling and repairing Perth bores for well over a decade. Our local knowledge guarantees you the best groundwater retrieval system tailored to suit wherever you are in Perth. Bores and reticulation systems are what we do. We are members of both Irrigation Australia and the Australian Drilling Industry Association (ADIA). Our experience means we can guarantee prompt and efficient Perth bore repairs in all suburbs from Lancelin down to Mandurah.

Call us on 1300 734 300 24/7 or visit our main Virgin Bores website here.

Bore Check Valve Perth

Brass check valve

Perth bore owners are turning on their water bores for the first time after Perth sprinkler bans have ended.  And some aren’t

 
Brass foot valve

working. A few calls today from people with the old well style bores that had lost prime after extended periods of no use. ( remember best to run them weekly for 2 minutes per station as allowed even during total sprinkl;er bans).  Most likely a leaking check valve ( foot valve , clacker valve etc) or leaking gland packing. Not a worry for our Perth bore service teams. We specialize in bore repairs. Give us a call on 1300 734 300 for prompt and friendly service.