If you have a submersible water bore and you are doing renovations, it is important to consider the water bore as part of your planning.
Old Fremantle Bore
We attended a job in North Fremantle that had an old submersible bore that was working before renovations but had not been reconnected.
We sent our electrician to test the motor and quote the on the cost of re-connection of the submersible water bore.
He found the motor tested OK but that it was an old installation with imperial sizes, no slack on the bore head cable and lots of limestone in ground and concrete around the house. It will be a challenging job to reconnect electrically.
There was a new start box needed to even test the bore itself was OK electrically as original start box was missing.
Once the bore is back up and running this one is to be wired just for manual operation as the owner intends to continue using it just manually from a hose. Later if it is connected to automatic reticulation we can install a reticulation controller.
If you are renovating and have a water bore, call us for advice on 9246 0111 or go to our website HERE
We fix bores and retic in all Perth suburbs
We are in Fremantle and surrounds on a daily basis fixing bores and repairing reticulation sprinkler systems. You can also call us for any Perth suburb