Tag Archives: bore automation Perth

Automate Old Bore Perth

We are presently automating the reticulation systems in two adjacent Duncraig homes.

They share an old style bore which had been operated by a manual switch. So far we have installed a separate automatic reticulation controller on each property and are replacing the old manual gate valves with automatic solenoid valves (3 solenoids on one property and 5 on the other).

The retic system at one house hadn’t been used for 20 years so fingers crossed when we give it a well overdue service and some TLC!

We are up for a challenge,

If you need help automating your old style well or modern submersible water bore call Troy on 9246 0111.

Bore Automation Perth

We are automating an old bore in the southern Perth suburb of Shoalwater.

As pictured it is an old style well with a tin lid.

The sprinkler system is currently manually operated with five inground gate valves. This is common with these older style Perth water bores.

We will replace manual valves with 24  V solenoid valves which will be wired into a new reticulation controller. Our electrician will do the interface to start the bore automatically via a 24 V relay.

We do this type of Perth bore automation quite regularly with single station bore automations from as low as $750.

If you are in Perth and we can help you with a bore automation check out our website HERE or call one of our team on 9246 0111