Tag Archives: bore irrigation

Electrician connecting bore

Electrician connecting water bore Perth

Our electrician connecting a new domestic water bore in Melville. This submersible bore is the typical 1.1kw

Sumoto stainless steel submersible pump motors.

stainless steel pump and motor connected to the clients existing reticulation sprinkler system. Once the electrician is finished and the bore is connected in to the retic system nothing will be visible at the surface. The small green lid visible in the foreground will be buried just under the lawn concealing the borehead.

This bore will be a shared bore.  The neighbour will be able to turn the bore on from his own reticulation controller. The two house shared the cost of the water bore drilling. Quite a common practice in Perth.

Troubleshooting Guide Water Bore not working Perth

If the pump is not starting at all

  • check the fuse or circuit breaker that should be in your meter box and labelled “bore” or “pump”
  • if it is 3 phase reset the  415-440v D.O.L ( Direct Online Starter)

3 phase DOL Bore starter

  • if it is single phase there is most likely a separate 240v start box with a reset/over-ride switch, check that.
  • if it is operated from a reticulation controller check that that has 240v power going to it. Just because the reticulation controller has a display does not mean it has 240v power. Remove the 9v back up battery and confirm there is still a display.
  • can you hear the 24 v relay clicking in or the contactor making a clunking sound when you start the retic controller? Starting the reticulation controller sends a 24v signal to a relay or contactor which turns on the “mains” power to the bore pump.
  • if all the above seems OK and it is a submersible pump, perhaps the motor is starting and you can’t hear it and another related water delivery problem exists. Does your electricity meter speed up when you start the pump? You can check this if it is the old spinning disc style.
  •  if it is a centrifugal pump in a well have you checked the isolation switch normally located in the top well liner?
  •  have you had electrical work recently done at your house?

Call  us on 9246 0111 if none of the above helped. We may be able to help further on the phone or we will send our mobile bore service teams to any Perth suburb or read more on our main website

Bore repairs Perth

Thanks for visiting our Blog. Water Bores and Perth Groundwater are our passion. If your water bore is broken we can fix it!

From Lancelin all the way down to Mandurah our service teams are ready to help. We repair both modern submersible bores and the old well-liner type. From blown fuses to bores running out of water, we can help. Because we specialize in water bore repairs we are Perth’s number 1 callout mobile service to repair bores. No need for a multiple of trades and the delays in between getting an electrician and  then a pump man. We can send our bore electrician first off if it is an electrical problem then we can fix there and then if simple or follow right through to pump replacement if necesary.   Call us on 1300 734 300 for prompt metro-wide service.

Water bore not working in Perth?

Water Bore not working?

If you have a bore problem of any type in the Perth metropolitan area, call us 7 days a week.  1300 734 300

If it is fixable we can fix it!

Phone: 1300 734 300.      You are reading our blog or you can choose to Visit our Website

bore circuit breaker trips

A common call to our bore repair hotline 9246 0111 is ” the circuitbreaker in my meter box keeps tripping whenever I turn my water bore on“.

This is an electrical problem and requires a bore or pump electrician. It may well ultimately turn out to be a fused or burnt out pump motor ( possibly covered under insurance) but often it is found to be a simple cabling issue or a fault with the bore start box, start capacitor or sometimes in the 3 phase bore DOL (Direct Online Starter). To save time and money it is best to have an specialist bore electrician attend who specializes in bores,pumps and reticulation and who has both the knowledge and special test equipment required to diagnoze the problem efficiently. Our electricians do these repairs every day all over Perth so you are not paying someone to re-invent the wheel! It’s what we do!  Our Perth bore repair service teams also carry a host of spare parts to fix the most common bore problems enabling them to  carry out the repairs economically and promptly.

Phone Troy any time on 9246 0111 prompt bore repairs any Perth suburbs or go to our website for more information on bore circuit breaker trips HERE