All submersible bores have electrical cable that goes down beneath the water table delivering mains power to the submersible pump (call us on 9246 0111)
It is important that the bore cable is sound and won’t allow water to get inside. Water ingress can lead to electrical failure of the motor or at best persistent tripping of the control equipment, circuit breaker or cause fuses to blow. Pictured is just part of this summer’s suspect or faulty electrical cable that has been replaced this year.
If you have a similar problem with your submersible bore our specialist water bore electricians have the experience, knowledge and equipment to diagnose the fault. Call us Perth metro wide 9246 0111 or visit our main website here
We repair submersible water bores in any Perth suburbs. We are a family owned business and have been going in Perth for nearly 20 years.
A common call to our bore repair hotline 9246 0111 is ” the circuitbreaker in my meter box keeps tripping whenever I turn my water bore on“.
This is an electrical problem and requires a bore or pump electrician. It may well ultimately turn out to be a fused or burnt out pump motor ( possibly covered under insurance) but often it is found to be a simple cabling issue or a fault with the bore start box, start capacitor or sometimes in the 3 phase bore DOL (Direct Online Starter). To save time and money it is best to have an specialist bore electrician attend who specializes in bores,pumps and reticulation and who has both the knowledge and special test equipment required to diagnoze the problem efficiently. Our electricians do these repairs every day all over Perth so you are not paying someone to re-invent the wheel! It’s what we do! Our Perth bore repair service teams also carry a host of spare parts to fix the most common bore problems enabling them to carry out the repairs economically and promptly.
Phone Troy any time on 9246 0111 prompt bore repairs any Perth suburbs or go to our website for more information on bore circuit breaker trips HERE