New bore Wilson

Solenoid valves Wilson
A manifold of solenoid valves
Ready for retic in Wilson
New bore ready for retic in Wilson

Our Virgin Bores team have just finished installing a new submersible water bore in Wilson. This one we drilled to 19 metres at a newly completed house.

We backed the drilling rig truck up to the small perimeter wall and were able to drill “over” the shin high wall. The new bore is just behind the Virgin Bores sign on the other side of the wall. Note the small pile of sand resulting from drilling a 100mm diameter borehole to a depth of 19 metres. Water bearing ground was encountered at 5 metres.

This is pretty standard for Wilson. We installed a 1.5 horsepower (1.1 kilowatt) stainless steel submersible pump and Italian Sumoto motor. Included in this clients bore package was a 6 station Rainmaster reticulation controller. We then installed 4 solenoid valves in the ground and automated them. The 4 solenoid valves are pictured here adjacent to the actual borehead. The borehead was then covered over by a small green bore box and buried under the sand. The solenoid valves will be covered by valve covers for access if needed. Our bore electrician wired in the controller to auto start the bore pump and operate the solenoid valves.

Now a very easy job for the client to finish the reticulation sprinkler system. If we can help you with a bore or retic work in Wilson or surrounds please call us on 92460111 or visit virginbores.com.au

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s