Reticulation controller wiring

Bore not starting Booragoon 

We had installed a bore for Bob in Booragoon a few years ago.

He rang to say the bore was not working. We sent out our specialist bore electrician Dave. The submersible pump motor tested ok and he noted that there was no 24 volt to relay from controller.

He found that there was a red multicore running along the pavers from below the reticulation controller to below the bore start box. The joint connection at the bottom of the start box was faulty so he remade it.

All working again on front 2 stations. There was no cover on station 3,4,5 and 6, it was cut off due to construction. He fixed.

We have drilled and repaired many bores in the Booragoon area and surrounding suburbs of Mount Pleasant, Myaree and Melville. If you have a problem with your Booragoon bore call Troy on 9246 0111 or if you submersible pump is not working find help  HERE

Reticulation controller wiring
Reticulation controller of broken bore