Tag Archives: electrical

Water Bore Quote Leederville

Virgin Bores was quoting on a new submersible water bore in West Leederville when we spotted this fantastic recycling with an old mattress frame / springs used to make a vertical garden.

Great recycling with a vertical garden made mattress springs
Vertical garden made out of mattress inner springs

 

It makes a perfect frame for the plants to climb on. These plants will flourish with a new submersible water bore and the nutrient rich Perth bore water. The Perth coastal plain is generally ideal for bore water. Unlike the old fashioned wells with the tin lids a modern submersible bore is invisible and silent. It lasts and will save you money. Also with a water bore you can water your garden three days a week instead of two on mains water. Obviously you only water when needed.

A side shot of what a water bore looks like under ground
What a water bore looks like underground

If you would like talk to us about a new submersible bore check out our website HERE or call us on 9246 0111 7 days a week.

Thanks for Fixing My Bore

A good review for one of the team at Virgin Bores. As we say on our letterhead  “Thank you for the business – we appreciate it!”

Thanks for Fixing My Bore

Our service teams are on the road and fully equipped to fix your bore electrical problem quickly.

This happy Perth bore service customer had an electrical problem fixed quickly. If you have a bore repair needed at your Perth home call us on 9246 0111 7 days a week or   visit our main website here.

 

Insurance Claim on Fused Submersible Pump

Submersible bore head electrician
Electrician working on Submersible Pump

If your submersible pump is fused it may be covered by your household insurance. Call us on 9246 0111.

We were happy to receive a handwritten note on Friday from a customer in Kardinya. We replaced his fused submersible pump motor and steered him in the right direction with his fusion insurance claim.

He said, “Thanks for fixing my submersible bore pump so promptly. I didn’t even know fusion might be covered under insurance“. Our electrician tested the motor and wrote it up as fusion.

If we can help you, 9246 0111 or visit our main website here for more water bore information

Bore light stays on?

Familiar call today from a lady who happened to live in Sorrento, but we get similar calls from bore owners all over Perth. “the light on my bore box on the wall has stayed on even after I have turned the reticulation controller off “.  This can turn in to a bigger problem so first things first, if you are reading this blog and your bore box light is on but there is no water pumping out anywhere please straight away turn the bore mains power off.  Turn it off by either turning off the circuit breaker ( or pulling the fuse) labelled “bore” or “pump” that you will hopefully see in your meter box. Or turn off the bore box isolation switch that is located on the bore box on the wall. ( this is called a bore start box, not to be confused with the reticulation controller). Worst case if you can’t turn it by either of these two methods then turn off your mains power master switch and call us pronto on 1300 734 300.

Lowara bore start box

What has most likely happened is that your automatic reticulation controller has correctly sent the 24 volt start signal to the relay in the bore start box and this has started the 240v bore at the same time as the reticulation controller has correctly sent a signal to open a solenoid valve allowing water to flow to the sprinklers. All good so far but then when the automatic reticulation controller has run through its cycle and shut the last solenoid valve the pump has continued to run. Most likely the start relay has stuck on and needs replacing. Prolonged operation of any bore pump with no water being able to flow (dead heading ) can cause a multitude of problems. Most commonly with submersible pumps the rising poly mainline will overheat and “blow”. With centrifugal well pumps overheating leads to several serious problems. Give our Perth bore service hotline a call on 1300 734 300 or visit our main website for more help on bores and reticulation.

Bore Pump stopped working?

Check the pump circuitbreaker or fuse.

Seems today was “D” Day with many Perth bore owners turning their water bores on for the first time this season….or should I say trying to turn them on. Calls today from Joondalup, Floreat, Landsdale, Safety Bay and Armadale all with a similar story. Either the pump cicuitbreaker was tripping ( or fuse blowing ) when the bore was turned on or nothing was happening at all. Some simple tests and solutions can be found in our Perth bore troubleshooting guide in this blog or call our Perth Bore Service Hotline    1300 734 300      Perth metro-wide    All Suburbs     We are specialists in both water bores and reticulation ( irrigation ) systems so whatever your problem we can fix it!