Water bore for Parkwood

We have a client in Parkwood who is getting a modern submersible water bore. They live opposite this beautiful park.

New water bore drilled opposite this park Perth suburb Parkwood
Replacing old well opposite this park in Parkwood

It is 3 metres to groundwater and there is 22.5 metres of water at their Parkwood home. We will drill 16 to 22 metres and use a good quality stainless steel submersible pump and motor.

The new submersible water bore will replace the old style well with a tin lid that he dug and sludge pumped over 30 years ago (pictured below) These shallow old style wells are commonly seen in Parkwood, Ferndale and Lynwood area. We will replace old style well with a new water bore which is not visible from the surface.

Old well in Parkwood dug 30 years ago
Parkwood well style bore
Replaced old style well with modern water bore
We replaced this well with a modern water bore

We will install 100 ml slotted casing to the bottom 6 metres of the bore. We will pack the slotted casing with drillers gravel to enhance water filtration. We will also air develop. This is particularly important as the area has uncertain ground conditions and potential clays. We have drilled a number of bores in the Parkwood area and surrounds.

We also have teams repairing waterbores in the Parkwood and surrounding areas of Lynwood, Langford and Canning Vale and installing and repairing reticulation.

Call us on 9246 0111 or if you live in the Parkwood area and would like to discuss replacing an old well with a new style submersible water bore there is more information HERE