Tag Archives: submersible

Bore Perth, Clear bore water, coastal water bores, Uncategorized

Woodridge Water Bore & Reticulation 

We have drilled many water bores in the Woodridge area and have experience in drilling deep water bores.

In general terms it takes us about a week to complete a Woodridge water bore with drilling, electrical and connection to your reticulation at your Woodridge property.

The depth to water in the area varies. Two of the water bores we have drilled in the area were 55 metres to water and 50 metres to water. Many people are interested in talking to us about a new water bore because they would like to save money.

We specialise in drilling these deep water bores in areas like Woodridge and Gabaddah.

Call us on 9246 0111 for a chat about a new water bore or repair of a bore and reticulation in the northern suburbs or get more information HERE .

 

Drilling a new submersible bore in Woodridge
We drill water bores in the Woodridge area
Water bore drilling in the Woodbridge area
The Woodbridge area
coastal water bores, Members ADIA & IAA, Uncategorized

Marmion submersible water bore

​

 

​​This week we are drilling a new submersible water bore in Marmion.

The team normally make an early start. This video was taken at 8am and they had already drilled 20 metres of a 29 metre submersible water bore in Marmion.

The water table was reached at 18 metres. This submersible garden bore is for a new house and access restrictions mean we are drilling at the very front edge of the as yet unlaid sloping driveway.

We specialise in coastal suburbs like Marmion, Hillarys, North Beach and Trigg. We also service and repair water bores in Perth’s coastal suburbs. Get in touch if you would like a new water bore HERE  or phone David on 9246 0111

IMG_1017

Bore Perth, New Water Bores, Old style well, Water bore

Water bore for Parkwood

We have a client in Parkwood who is getting a modern submersible water bore. They live opposite this beautiful park.

New water bore drilled opposite this park Perth suburb Parkwood
Replacing old well opposite this park in Parkwood

It is 3 metres to groundwater and there is 22.5 metres of water at their Parkwood home. We will drill 16 to 22 metres and use a good quality stainless steel submersible pump and motor.

The new submersible water bore will replace the old style well with a tin lid that he dug and sludge pumped over 30 years ago (pictured below) These shallow old style wells are commonly seen in Parkwood, Ferndale and Lynwood area. We will replace old style well with a new water bore which is not visible from the surface.

Old well in Parkwood dug 30 years ago
Parkwood well style bore
Replaced old style well with modern water bore
We replaced this well with a modern water bore

We will install 100 ml slotted casing to the bottom 6 metres of the bore. We will pack the slotted casing with drillers gravel to enhance water filtration. We will also air develop. This is particularly important as the area has uncertain ground conditions and potential clays. We have drilled a number of bores in the Parkwood area and surrounds.

We also have teams repairing waterbores in the Parkwood and surrounding areas of Lynwood, Langford and Canning Vale and installing and repairing reticulation.

Call us on 9246 0111 or if you live in the Parkwood area and would like to discuss replacing an old well with a new style submersible water bore there is more information HERE

New Water Bores, Southern River

New water bore Southern River

We are going to be drilling at this property in Southern River. We have a lot of experience in the area and can be contacted on 9246 0111.

We have drilled a lot of water bores in the Southern River area and know the conditions well. The depth to water at this property in 4.3 metres and we would drill 18 to 20 metres into water.  The ground conditions in Southern River can vary with interspersed layers of clay which can inhibit ground water. For this reason we often allow extra slotted casing, extra gravel packing and extra air developing to help compensate.

Southern River home with new submersible bore
Location of new water bore in the Southern River area

We would use a good quality Italian stainless steel pump, a 1.1 kw motor coupled to a 12 stage wet end.

We attend the property to talk to our client about their requirements and about where to drill their water bore. We aim to drill close to the metre box to minimise costs to the client. Pictured is where we are looking at drilling at this property.

We also service and repair water bores, bore pumps and reticulation systems in Southern River and surrounds including Piara Waters.

If you are in the Southern River or Piara Waters and would like to discuss a water bore for your home call David on 9246 0111 or look at our website HERE.