Tag Archives: Family business

Replace Reticulation Controller Perth

Thanks Angela for letting us know you were happy with the supply and installation of your new reticulation controller at your house in Armadale.

One of our specialist electricians installed a new 6 station reticulation controller. It has a back-up battery and a built in transformer hardwired into mains power and the installation of a multi core tail to solenoid location in ground.

If your reticulation controller needs replacing, call Troy on 9246 0111.

Submersible Bore Pump Tripping

A customer in Dalkeith rang us on 9246 0111 after their three phase submersible bore was tripping their 3 phase circuit breaker and they were not getting water from their garden bore.

We have an expert specialist bore electrician (Dave) who was the man for the job. He found that the three phase submersible motor was instantly tripping  the three phase circuit breaker in the meter box when the retic was turned on.

Dave meggar tested the pump motor at the borehead sending a current down hole to the motor. Pump motor tested fine.  What he did find was burnt out wiring in the junction box ( pictured below) contained in the green box at the top of the submersible bore hole. He replaced the junction box and all is working well now. Whilst there Dave tested the reticulation system to make sure there were no other faults.

Specialist electrician repairs water bore
Burnt out wiring in junction box at top of submersible bore in Dalkeith

A modern submersible water bore can save you thousands of dollars. So if you don’t have a water bore or your water bore needs repair call us on 9246 0111 or find out more HERE

Repair or Install Water Bore Perth’s Coastal Suburbs

Pictured is the bore start box for a submersible water bore at a home in the coastal Perth suburb of Trigg.

bore start box for Trigg water bore
Trigg water bore start box

There was an existing reticulation system at this home in Trigg when new water bore was drilled. The reticulation system was disconnected from mains water near the water metre. The retic controller was on a back wall of the house and was wired to send a 24V start signal to this bore start box.

The bore start box is located next to the electrical meter box next to the front door.

We have been in the water boring business for nearly 20 years and can install and repair your water bore. We have the experience and the knowledge to work out what is wrong with your water bore if it needs repair.

Water bores save money
Savings money with a water bore

….and as is shown here a new submersible water bore saved money for this Trigg homeowner

If you live in the coastal suburbs of Perth and would like to talk to us about a new water bore call us on 9246 0111 or request a bore quote HERE

If your water bore needs repairing go to our main website HERE

Water bores in Two Rocks

We have vast experience in drilling and servicing water bores in the Two Rocks area and surrounds over the last two decades.

We have drilled dozens of bores stretching from Yanchep and Two Rocks across to Seatrees Estate and  Breakwater Estate. Bores in the area range from some shallow ones right near the coast at Yanchep and Two Rocks typically around 18 metres and up to 60 metres further inland near Seatrees Estate and Breakwater Estate.

In the smaller residential blocks in Two Rocks we normally install 1.1kw submersible pumps perfect for normal home gardens. In the 5 acre blocks over at Seatrees and Breakwater we would normally instal a 1.5 or 2.2 kw pump to give closer to 150 litres per minute.

All new drilling and installations are handled by our new Bore team at Virgin Bores.

For bore service and repair call Troy on 0408 454 130 or if you live in the Two Rocks area and you would like to discuss a submersible water bore look HERE

Water bores drilled and repaired in the Two Rocks and Wanneroo areas
Over 15 years we have drilled and repaired many water bores in Two Rocks

New Water Bore Nedlands

We have drilled a new submersible water bore in Nedlands to a depth of 22 metres. It is popular in the area to have a water bore to water gardens and lawns. The depth to water in the area is mid range and we would normally use a 1.1 KW submersible pump and motor.

There was no access at the front of this Nedlands property for our bigger water boring rigs so we gained access using a trailer mounted rig. We manoeuvred the rig off a narrow back lane using the trusty old Landcruiser.

Water bore Nedlands

If you live in the Nedlands and Dalkeith area and are considering a water bore there is more information HERE including a bore quote request form or call us on 9246 0111.

We have many clients in the Dalkeith and Nedlands area. We service and repair their submersible water bores and reticulation.