Tag Archives: pump

Reticulation Perth, Water bore

Repair Water Bore and Retic Perth

Our water bore and reticulation repair teams are on the road and are fully equipped when you call us on 9246 0111. We will give expert, prompt and friendly service.

Repair retic and water bores Perth
We will repair retic and water bore promptly and efficiently

You may see Adam out and about in the Renault. This small truck is ideal for carrying lots of black poly, our winch, pumps and all other equipment needed to repair your Perth water bore.

Winch used to pull up water bore pump motor to repair
Van fully stocked with submersible pump motors
Van fully stocked with submersible pump motors
Winch used to pull up water bore pump motor to repair
Adam will also pull up in your driveway if you have had a new bore drilled by the Virgin Water Bores team to install bore pump OR if your submersible pump needs to be pulled to the surface for service or repair.

Call us on 9246 0111 if your water bore needs repair.

NB During winter sprinkler switch off bore water users are allowed to flush sprinkler systems once a week on their normal rostered days and time for 2 minutes a station.

Repair water bore Perth
We will repair your water bore and be off to our next client

We will repair your water bore and be off to our next client
Winter is a great time to do any service and repair on your reticulation and water bores in Perth as we are not as busy as summer. If you are interested in getting a new bore there are also winter specials if you call Virgin Water Bores on 9246 0111 or check us out here

 

 

 

Water bore repair

Bore Pump Reticulation Repair Two Rocks

We repair submersible water bores north of Perth.

If you have a problem with a water bore in Two Rocks, Breakwater Estate, Seatrees Estate or Yanchep we can fix it fast.

Repair and drill water bores Breakwater Estate
Drilling water bore in Breakwater Estate
Drill new water bore Breakwater Estate
Drill and repair submersible water bores Breakwater Estate

We repair or replace submersible pumps and reticulation controllers. We handle burnt out pumps and insurance fusion claims.

Our electrician performs prompt diagnosis and repairs to any retic or bore system. Call 7 days 9246 0111 or book a bore repair here

Bore repair

My submersible pump running with no water

My submersible pump running with no water

My submersible pump running with no water


— Read on waterboretroubleshootersperth.com/2013/09/14/i-know-my-submersible-pump-is-running-but-no-water/

Happy customer

Repair Submersible Water Bore Gosnells

 

Chris lives in Gosnells and his modern submersible water bore 2 horsepower 3 phase motor was tripping.

We sent in our specialist bore electrician Dave to test the motor and it tested fusion.

As you can see the bore head has a large gate valve so it took a bit of digging and mucking around.

Adam then returned and replaced the 1.5 KW 3 phase motor, wet-end and cable.

Dave then returned and fitted new junction box. He ran and tested and all OK

Chris Gosnells Borehead

Thanks so much to Chris for the following review. We are a family run and have been in the business for nearly 20 years and love to look after our customers,

Chris Gosnells Review

If we can help you call us on 9246 0111 or we can call you

Bore broken

Repair Water Bore Leeming

Mel asked us to look at the modern submersible water bore at his son’s house south of the river in Leeming.

Top of water bore in Leeming
Leeming submersible water bore

We sent our specialist bore electrician Dave to do a range of tests to work out the problem. He tested the single phase two wire submersible motor and found it was fused. The motor start winding is damaged by rupture of internal capacitor.

In some cases a fused motor can be claimed on the householders insurance.

Repair water bore Leeming

Our service teams will return to replace the motor so the householders bore and reticulation will be up and running.

If your modern submersible water bore needs repair south of the river call us on 9246 0111 or we will ring you about your bore repair

Water bore

Bore Not Starting Tapping

Mark from Tapping phoned us on 9246 0111 to say his bore was not working.

We sent our specialist bore electrician Dave to test the single phase two wire motor which tested OK. Good news!

Borehead of Tapping water bore
Top of Tapping water bore

He found the 24 volt relay was faulty and replaced it for new. All is working again on 3 stations with all readings OK.

Tapping water bore repaired
Tests OK after relay replaced

If you live in the Tapping area or the surrounding suburbs of Wanneroo, Banksia Grove or Joondallup and your modern submersible water bore or old well is not working and needs repair call us on 9246 0111

FYI (source Wikipedia)

Tapping is a suburb of Perth, Western Australia, located within the City of Wanneroo. It came into being in the early 1990s as a subdivision of Wanneroo, originally as part of the Carramar estate. Tapping was chosen as the suburb name in honour of an early settler family in the Wanneroo area. Mr William Tapping arrived in 1886 and Molly and Dolly Tapping were long time Postmistresses in Wanneroo. The name for the suburb was approved in 1997.

Fix old well Perth

Repair Old Well Queens Park

Dave our specialist bore electrician attended a job in Queens Park where it was reported the centrifugal pump for an old well wasn’t working.

The single phase Davey Boremaster tested OK so he replaced the 30 mf capacitor for new and the water bore is working again.

img_7425.jpg

However he did note on his report that there were distinct mechanical sounds and he was not sure how long the pump would last before it fails mechanically.

If your old well water bore needs repair and you are in Queens Park or the surrounding areas of Welshpool, Cannington or Bentley call us on 9246 0111 or check out our website

Fix old well Perth

Fix Old Bore Yangebup

One of our recent bore repair jobs was a centrifugal pump motor tripping the circuit breaker in the backyard of this property in Yangebup. You can see the rusted and partially collapsed tin lid of the bore well in this picture.

Bore safety

As an aside it reminded us all old style bore well lids should be secured. Take a look here on bore safety.

Tin lid of old well in backyard of a property in Yangebup
Yangebup old bore needs fixing

Dave, our specialist bore and pump electrician attended the job and found there was a 3 liner well with bore pump located on wooden boards 2 liners down.

Fix 3 liner well Yangebup
3 liner  bore well Yangebup

 

Pump failed mechanically

The 3 phase pump and motor had failed mechanically and was just humming. The pump had not fused and was fine electrically but need replacement.

We returned and supplied and installed a 2.2 kW 3 phase centrifugal pump and fittings.

Our customer now has bore water again.

Mobile bore repairs

If you are in Yangebup or the surrounding areas of South Lake, Bibra Lake or Spearwood and your old bore well needs repair call us on 9246 0111 or book your repairs here

Specialist Bore Electrician

Water Bore Repair Electrical

Often we get called to bore pump problems where customers have been told by someone, even by electricians, that the problem “must be the pump” and it needs replacing.

There can be a vast number of reasons why your water bore is not working. If you call on 9246 0111 we will talk you through the problem over the phone. We will then send the correct person to diagnose/fix your water bore.

If we think it is an electrical problem we will send one of our specialist bore electricians.

Electrical problem with domestic water bore Perth
Our specialist electrician fixing water bore

It can be hard for the inexperienced to diagnose bore pump faults particularly with submersible pumps. Often though we find on closer examination it is a control equipment or wiring issue. Our specialist bore electrician tracks down faults and repairs bores, retic and pumps on a daily basis. We have the correct diagnostic equipment and years of experience so we will save you time and money.

If your water bore needs repair call us on 9246 0111 or BOOK A BORE SERVICE HERE

Members ADIA & IAA, submersible pump motor

Best Motor for Water Bore Perth

We repair or replace all brands of submersible bore pumps.

We are proud to be able to use genuine Italian PM Technology motors compatible with all standard submersible 4″ pumps.

PM Technology Motor - 2

It is a robust and well-engineered stainless steel submersible motor that is well suited for Australian down bore-hole conditions.

For a good detailed read on the PM Technology motors check out HERE

PM Technology Motor - 3

If your bore needs fixing call us on 9246 0111 – 7 days for prompt onsite attention in any Perth suburb. We also fix old wells and centrifugal bore pumps.