Our specialist service automate old well bores to start from modern reticulation controllers and replace manual gate valves with automatic solenoid valves. Our specialist team automated this old well in High Wycombe. Last week we automated old style wells in High Wycombe, Waterford, Bentley and Karawara. Sing out if you want help automating your bore and give Troy a call on 92460111.
Enjoy holidays away without worry. We service and repair anything to do with bores or retic systems all over Perth.
If you would like a modern submersible water bore or a new reticulation system in the Noranda area call 9246 0111.
We drilled a new submersible garden water bore here last week at this house in Noranda, now we have installed a new reticulation system. With the extra flow from the bore versus mains scheme water, we were able to run pop up sprinklers for the lawn on one station and separate micro sprays for the garden beds on another. The half sprinklers that face the house backing onto the curb are prone to car tyre damage. So we installed come concrete surrounds to this line of sprinklers and those on the edge of the driveway to protect this new Noranda reticulation system.
New reticulation system Noranda
With the installation of a modern submersible water bore, the client is now able to use their sprinkler system three days a week instead of only two days allowed from mains water. This Noranda front garden is about to have a new lawn laid. They will be able to apply for a new lawn exemption and water the new lawn more often details here
While we were there, we popped our head over the side fence and took a look at the neighbor’s garden. We drilled new submersible water bore at the property last year and their garden looked great. We are very happy to get referrals from happy customers.
If you live in the Noranda area and would like to discuss a new water bore or reticulation system call us on 9246 0111 or check out our website HERE
Visited two homes today, both coincidentally in Dianella, to advise on automating their bores. They were both typical old well style bores commonly seen in Dianella. Both bores were manually operated from a DOL starter and ran two separate stations front and rear. Two gate valves were manually turned to send the water either to the front or back after the bore was started manually. This is a very typical early installation common in Perth bores.
To make a bore reticulation system automatic we firstly fit an outdoor reticulation controller and replace the manual gate valves with automatic solenoid valves. Our electrician then interfaces the retic controller to automatically turn on the bore starter via a 24v relay. We can automate either 3 phase or single phase bores. When the reticulation controller (timer) turns on the bore it opens the required solenoid valve at the same time and ” hey presto” the bore reticulation works automatically at the pre-programmed time! We program it to comply with Perth bore sprinkler roster days and the homeowner can “set and forget”.
Call us on 9246 0111 for advice or quotation or visit us at HERE
Our mobile service teams do prompt repairs to ALL TYPES of Water Bores & Reticulation Sprinkler Systems Perth metro-wide. Free phone advice. Our experience saves you time and money. Bore repair HOTLINE 1300 734 300 North of River: Troy 0408454130 South of River: Brett 0411511611
You must be logged in to post a comment.