Tag Archives: bore electrical

bore saves money, Happy customer, Members ADIA & IAA, New Water Bores

New Submersible Bore Wembley

Leave a comment

We have just successfully completed a new submersible water bore in Wembley. Call us on 9246 0111

Thanks to Pauline for letting us know she was happy with the modern submersible water bore we drilled at her Wembley home. It is great to get such a good review from Pauline for our installation team at Virgin Bores.

“I just wanted to thank you for the wonderful job your guys did in installing my recent bore. I have never encountered such polite, considerate and thorough trades people before and it’s a credit to your business for contracting only the best. It was an experience I was dreading but soon realized my fears were unfounded when everything worked out so easily. Thank you & well done”

If you have been thinking about a new water bore and live in the Wembley area or surrounds call us on 9246 0111 or get an online quote

Bore Repairs & Service, Electrical Problems, Happy customer

Thanks for Fixing My Bore

Image Leave a comment

A good review for one of the team at Virgin Bores. As we say on our letterhead  “Thank you for the business – we appreciate it!”

Thanks for Fixing My Bore

Our service teams are on the road and fully equipped to fix your bore electrical problem quickly.

This happy Perth bore service customer had an electrical problem fixed quickly. If you have a bore repair needed at your Perth home call us on 9246 0111 7 days a week or   visit our main website here.

 

Bore Repairs & Service, Members ADIA & IAA, submersible pump motor

Submersible Pump Motor Failed?

Leave a comment

What are the causes of submersible bore pump motor failures?

The majority of  electrical failures of submersible pump motors in residential garden bore installations is as a result of the burning out of stator windings. Causes include, but are not limited to, high voltage surges/spikes and lightning strikes.

Other causes include-

  • The running of a pump against a “closed head” ( nowhere for the water to pump , closed valve, blocked outlets etc )  with limited water flowing past the submersible motor to aid in cooling, can cause failure of the thrust system. Dead-heading can also result in the “blowing” of the rising poly main line that delivers the water to the surface.
  • If a pump is run with not enough back pressure or head this can cause premature damage to upthrust bearings. It is important the pump is run on an accepted part of the “pump curve”. In a nutshell it must be running enough, but not too many, sprinklers.
  • Sand or abrasive matter in the bore  which can cause the shaft seal to wear ultimately causing submersible motor failure.
  • A failed check valve can cause back spinning of the pump impellors as the water flows back down the main line to equalize with static water level. This spins the pump at low RPM with insufficient lubrication. In deeper submersible bores this can, over time, cause failure.
  • constant stop/start, stop/start of the motor (machine-gunning) may lead to pump/motor shaft failure

Our bore service guys cover all of the Perth greater metropolitan area and are in fully stocked vans. Call us on 9246 0111 to talk to us about your bore or book a bore service online

Bore Repairs & Service, Electrical Problems, Happy customer, Insurance claim

Insurance Claim on Fused Submersible Pump

Leave a comment
Submersible bore head electrician
Electrician working on Submersible Pump

If your submersible pump is fused it may be covered by your household insurance. Call us on 9246 0111.

We were happy to receive a handwritten note on Friday from a customer in Kardinya. We replaced his fused submersible pump motor and steered him in the right direction with his fusion insurance claim.

He said, “Thanks for fixing my submersible bore pump so promptly. I didn’t even know fusion might be covered under insurance“. Our electrician tested the motor and wrote it up as fusion.

If we can help you, 9246 0111 or visit our main website here for more water bore information

Bore Repairs & Service, Electrical Problems

Water Bore Fusion Insurance Claims

Leave a comment

With the ending of Perth metro sprinkler bans for 2013  Perth bore owners are testing their water bores for the first time this season……and some aren’t working! We have had calls today all with similar stories. “I’m starting my bore and the circuit breaker is tripping ( or fuse is blowing), what do I do?”. First thing is we send a bore electrician ( one who is experienced in pumps and bores ) with special equipment to test the circuits and windings of the motor. With submersible motors this can be done without winching the pump up. Remember if it is a fused bore pump motor it may be covered under household insurance. Also if the fault can be traced back to one of winters electrical storms it may be related, even damage from lightning induction, and this too may be subject to an insurance claim. This is a very good reason to have the matter attended to first by specialist bore repairers who can correctly diagnose the fault and possible cause. 1300 734 300 will reach us 24/7

Bore Repairs & Service, Electrical Problems

Water Bore Fusion Insurance Claims

Leave a comment

As Perth metro sprinkler bans are about to end many Perth bore owners are testing their water bores for the first time this season……and some aren’t working! We has calls today from Fremantle, Lancelin, Two Rocks and Sorrento all with similar stories. “I’m starting my bore and the circuit breaker is tripping ( or fuse is blowing), what do I do?”. First thing is we send a bore electrician ( one who is experienced in pumps and bores ) with special equipment to test the circuits and windings of the motor. With submersible motors this can be done without winching the pump up. Remember if it is a fused bore pump motor it may be covered under household insurance. Also if the fault can be traced back to one of winters electrical storms it may be related, even damage from lightning induction, and this too may be subject to an insurance claim. This is a very good reason to have the matter attended to first by specialist bore repairers who can correctly diagnose the fault and possible cause. 1300 734 300 will reach us 24/7

Bore Repairs & Service, Electrical Problems

Water Bore Perth Electrician -start capacitor.

Leave a comment

Our water bore service hotline today received an anxious call from a gentleman in Two Rocks. He was doing the right thing and testing his water bore before sprinkler bans end in 5 days time (31/08/12).  A bit of “interrogation” over the phone and we were able to diagnose a blown bore start capacitor. He had removed the cover of the start box himself, which we must emphasise is NOT to be done as it is 240 volt and dangerous. A few questions and we determined it was a 40 microfad start/run capacitor that had blown. It was swollen with  evidence of grey “gunk” that had oozed out of it, typical when the start capacitor blisters and the end comes off or a hole gets blown in the side. No worries our bore service electrician will fit a new one on the way up to Mondays prebooked Woodridge bore repair.  The bore electrician will test his bore pump motor and confirm if that is all that is wrong. The adjacent pic is of how a start capacitor in a bore start box shoud look. Perfectly cylindrical and not blistered or swollen.

Bore Repairs & Service, Electrical Problems

Electrician connecting bore

Leave a comment
Electrician connecting water bore Perth

Our electrician connecting a new domestic water bore in Melville. This submersible bore is the typical 1.1kw

Sumoto stainless steel submersible pump motors.

stainless steel pump and motor connected to the clients existing reticulation sprinkler system. Once the electrician is finished and the bore is connected in to the retic system nothing will be visible at the surface. The small green lid visible in the foreground will be buried just under the lawn concealing the borehead.

This bore will be a shared bore.  The neighbour will be able to turn the bore on from his own reticulation controller. The two house shared the cost of the water bore drilling. Quite a common practice in Perth.

Bore Repairs & Service, Bores & Pumps, Electrical Problems

We repair or replace all submersible bore pump and motor brands in Perth.

Leave a comment

We repair or replace all brands of submersible bore pumps. Some of the more well known brands or stampings are Lowara, Grundfos, Franklin, Universal, Davey, Red Jacket, Orange, Sumoto, Arwana, Centripro, Marlow, Pioneer, Onga, B & L and Coverco.

Sometimes it is confusing when different terms are used when describing submersible pumps and some industry jargon can be understandably hard for the novice to decipher. Talking about domestic stainless steel submersible pumps in Perth we are normally referring  to  4″ pumps ( designed to fit inside a 100mm borecasing). What is collectively referred to us the pump is actually two distinct and separate parts. The electric motor ( single or 3 phase) and the wet-end (or pump) which is the series of impellors. Both these parts bolt together and are almost always brand interchangeable i.e each brand fits together with each other.

Call us on 1300 734 300 for further info or help. We repair pumps and bores all over Perth.

Bores & Pumps, Electrical Problems, Uncategorized

Is my bore pump motor covered under insurance?

Leave a comment

If your water bore is tripping the circuit breaker when turned on then there are a variety of possible causes. One of these is a fused motor. Ring us for free over-the-phone advice or book our specialist bore electrician to attend. We can certify it as fused if this is the case.

Perth Pump/Motor Fusion and insurance cover: Many household insurance policies covering Perth homes have fusion  cover for fused electric motors (sometimes referred to as burnt out motors). This generally applies to bore pumps of both the centrifugal (old well liner style with tin lid) and the modern submersible water bores.

A common insurance definition for FUSION is “The actual burning out of an electric motor or its wiring caused by the electric current in it.” In the case of either centrifugal bore pumps or submersible bore pumps this refers to the electric motor that drives them. Various terms are used to describe the event of fusion. Some will refer to the pump motor as “burnt out” or “fused”. Some insurance policies refer to power surges. Additional insurance cover may be provided for lightning or storm damage to bore pump motors. Your bore pump motor replacement may be covered under you insurance. We have over a decade’s experience replacing fused pump motors in Perth and surrounds. Garden water bores of the modern submersible type are our specialty. we also repair commercial bores and the old well liner type. Call us on 1300 734 300. Perth metro-wide.

Click here for more info at our main website