Tag Archives: bore electrical

Bore broken, Bore Repairs & Service, Bores & Pumps, Checking bore and reticulation for summer, Electrical Problems, Members ADIA & IAA, New Water Bores, Water bore Ballajura

New water bore Ballajura

Leave a comment
Water bore problem Ballajura
Stuffed water bore Ballajura

It was a busy day in Ballajura today. We got called to a couple of bore electrical problems which we sorted quite quickly. We couldn’t immediately help the last call though.

The gentleman had a submersible bore that was of dubious construction. Not only was the borehole itself drawing sand, something which incidentally does not happen if the correct screens and gravel packing is used, but also the submersible pump was stuck irretrievably down the bore hole. The submersible pump had been installed down the bore without a stainless steel draw wire. The owner had erected a tripod and attempted to retrieve the pump by hauling up the poly pipe on a block and tackle. Unfortunately the poly pipe had snapped some metres down the bore hole and the poly pipe and submersible pump were now completely stuck.

Next week we will be drilling a new water bore for him. We’ll be sure to do everything to best practice standards to avoid problems like this in the future. We suspect this original bore had been a DIY or at best done by a backyard operator. Make sure if you are having a bore drilled in Ballajura or surrounds you use a licensed driller and preferably one who is a member of the ADIA.

If you would like a quote on a new water bore or need repairs to your existing bore in Ballajura give Virgin Bores a call on 92460111 or visit http://www.virginbores.com.au

Bore electrician, Bore Repairs & Service, Bores & Pumps, Checking bore and reticulation for summer, Electrical Problems

Water bore faulty Perth

Leave a comment

The sprinkler bans in Perth end at the end of August. We encourage you to only start using your Perth sprinklers when the garden needs it.

Perth bore owners have been out testing their water bores for the first time this spring. Some are faulty!

Electrical fault water bore
Bore electrical specialist working on submersible bore

We are hearing similar stories like  “I’m starting my bore and the circuit breaker is tripping or fuse is blowing, what should I do?”. We would send our specialist bore electrician Dave who has been doing this for years and is expert and experienced with water bores. He has special equipment to test the circuits & windings of the motor. We can do this without winching the pump up.

We remind our customers that if it is a fused bore pump motor it may be covered under household insurance. Also if the fault is storm related even damage from lightning induction that then this too may be subject to an insurance claim.

Submersible water bore from surface
Top of submersible water bore

To have the matter attended to first by specialist bore repairers who can correctly diagnose the fault and possible cause call the team on 9246 0111 or book an online service and read more about faulty water bores HERE

Members ADIA & IAA, New Water Bores

New submersible water bore at South Perth units

Leave a comment

Today we attended a block of very nice units in South Perth with a lovely idyllic garden.  However their yearly water bill is $5,000 and that is why they are installing a new submersible bore – to save money! 9246 0111 

Our new bore installation team at Virgin Bores are putting in a submersible water bore which will be drilled to 22 metres. The new bore will be connected to the existing automatic reticulation system. Our electrician will interface the existing retic controller to start the bore via a 24 V relay. The submersible bore will be hidden under the lawn.

The unit owners will enjoy free water to keep their gardens greener and under Perth water rostering because they have a water bore will be able to water three days a week instead of the two days a week allowed on mains water. Bore drilling in South Perth requires specialist knowledge and local experience because of the proximity to the river on two sides.

You can get more informationon water bores on our main website HERE or call 9246 0111 if you require a bore quote in any Perth suburb.

Retic controller South Perth
Retic controller South Perth
Members ADIA & IAA, New water bore Mount Lawley, New Water Bores

New Submersible water bore Coolbinia

Leave a comment

There are many very deep old wells in Mt Lawley and Coolbinia. If they are not working ring us on 9246 0111 and we will try and talk you through a solution.

Often these old wells have a decades old with centrifugal pumps at the bottom of 15 or so metre well with a rickety old ladder. Beneath the pump is often an old galvanized pipe going down a further 5 to 10 metres. This pipe or spear is also often on the verge of collapse. If the well is too deep we may have an issue repairing because of safety issues but we can advise you about that when you call. Interestingly, some of the old wells in established suburbs were dug by the home owners many years ago.

After years of band-aid solutions, as was the case of our client in Coolbinia, it was time for a modern submersible water bore. In this case access was restricted but we managed to back our drilling rig so the drilling platform extended over the low front wall.

Once the bore box pictured here is covered over the new submersible bore will provide years of reliable service operating silently and invisbly deep beneath the lawn.

We have drilled many submersible water bores in the Coolbinia and Mount Lawley area. If we can help you please call us on 9246 0111 or visit our website on HERE

New submersible bore in Coolbinia
New submersible bore in Coolbinia
Bore electrician, Members ADIA & IAA, Submersible bore pump electrician, Water bore

Submersible bore pump electrical

Leave a comment

When a submersible pump is assembled one of the most critical thing to get  right is the electrical connection that will spend its life under water.  Our specialist bore electrician Dave will get it right – 9246 0111. 

Most submersible water bores in Perth have this underwater connection done using a  heat shrink kit. The submersible motor has a factory installed “blue lead”  which is connected to the electrical cable that will come all the way up from the pump to the bore head at the surface.

Crimping submersible bore electrical cable
Crimping submersible bore electrical cable

Seen here is the factory lead first being crimped to the electrical cable and then the waterproof heat shrink kit is applied. These are a series of sleeves which are essentially  shrunk over the cable joins provided a waterproof connection.

Waterproof heat shrink joining motor lead to bore electrical cable
Waterproof heat shrink joining motor lead to bore electrical cable

A separate stainless steel cable holds the weight of the submersible pump so
no stress is placed on this electrical joint. Sometimes in old submersible bores incorrectly joined electrical cables can be a source of trouble. Our  bore electricians are well equipped to diagnose and repair any electrical
problem you may have with your bore or pump.

For repair or installation or replacement of submersible pumps in any Perth suburb call us on 9246 0111 or Troy on 0408 454 130. Further info about our Perth submersible water bore services and drilling of new bores can be found here.

Bore Repairs & Service, Checking bore and reticulation for summer, Electrical Problems, Members ADIA & IAA, New Water Bores

Unorthodox bore electrical work

Leave a comment

We won’t tell you where in Perth our service man came across this unorthodox bore and reticulation interface but it was north of the river.

The reticulation controller was an indoor model mounted outside. It “talked” to the 24 volt relay that turned on the old well style centrifugal pump. We were called because the old bore had stopped pumping water.

In this case ultimately the best solution was to replace the old well with a new style submersible style bore in the northern suburbs home. This was done by our Perth bore drilling arm Virgin Bores. Check out our website www.virginbores.com.au.

If you would like a quote for a new submersible water bore in any Perth suburb call one of our friendly team on 9246 0111

Unorthodox bore & reticulation interface
Unorthodox bore & reticulation interface
Electrical Problems, Members ADIA & IAA

Burnt start capacitor Ballajura

Image Leave a comment

This week we got a call to our Perth bore service team from a customer in Ballajura.
He said he switched his submersible water bore on and the box on the wall made a noise, the bore stopped and smoke started coming out of the box.
Our bore electrician attended and, as suspected, the start capacitor had blown.

Bore and retic service Perth
Blown start capacitor

The capacitor was quite burnt as evidenced in these pictures. This one was a 40 micrtofarad start run capacitor operating a 1.1kw submersible Sumoto pump motor.

bore start box burnt out

Our electrician replaced the capacitor for the Ballajura customer from stock we carry in the van. The electrician also fixed the affected connections and this Ballajura water bore was up and running again with the customer all smiles.
If we can help you with your water bore repair call on 92460111 or go to our website HERE. We service submersible bores and the old style wells with centrifugal pumps. All Perth suburbs.

Uncategorized

Testimonial from customer for Mirrabooka Water Bore.

Leave a comment

Thanks very much for the good review from Jim for Virgin Bores.

Good review Virgin Bores
A customer says thank you for good service

We drilled Jim a water bore for him in Mirrabooka.

The water bore drillers did a 36 metre bore on a sloping block in Mirrabooka. The specialist electricians then connected the bore.

It is great to have a happy customer with his water bore in Mirrabooka.

img_6038

If you live in Mirrabooka or surrounding areas call us on 9246 0111 or check out our website HERE

We can install and repair water bores in the Mirrabooka area

Uncategorized

Old Submersible Bore Cable

Leave a comment

All submersible bores have electrical cable that goes down beneath the water table delivering mains power to the submersible pump (call us on 9246 0111)

It is important that the bore cable is sound and won’t allow water to get inside. Water ingress can lead to electrical failure of the motor or at best persistent tripping of the control equipment, circuit breaker or cause fuses to blow. Pictured is just part of this summer’s suspect or faulty electrical cable that has been replaced this year.

If you have a similar problem with your submersible bore our specialist water bore electricians have the experience, knowledge and equipment to diagnose the fault. Call us Perth metro wide 9246 0111 or visit our main website here

Different types of old electrical cable

We repair submersible water bores in any Perth suburbs. We are a family owned business and have been going in Perth for nearly 20 years.

Bore Repairs & Service, Bores & Pumps, Electrical Problems

Thanks Bore Electrician Kewdale and Pump Replacement Carine

Leave a comment

It is great to hear from happy customers and hear good reviews. Thank you! 9246 0111

Thanks for sending our specialist bore electrician to Kewdale
Thanks for sending our specialist bore electrician to Kewdale

Our experienced bore electrician Dave attended Russell’s Kewdale property, checked his system and supplied and fitted a new reticulation controller.

We also attended Philip’s Carine property where we replaced his .75 kw 2 wire submersible motor / pump and tested that everything was OK.

“Thank you for your teams excellent work just prior to Christmas. Having the bore operational again has been fantastic. Once again thank you and I am happy to recommend your services to anyone. Regards Phillip.”

If we can assist you with specialist bore electrical advise or pump replacement visit our website  HERE or phone Troy (ask him how his fishing is going) on 9246 0111