Tag Archives: repair water bore

Repair Water Bore Trigg

The modern submersible water bore at property in the Perth coastal suburb of Trigg wasn’t working.

The reticulation controller seemed normal and the green light on side of bore start box was still coming on. Nothing tripping in meter box.

The man for the job was Dave, our bore electrician, who has been solving these sorts of mysteries for years.

He tested everything and found the fault with the illuminated green rocker switch on the bore control box

He isolated it and this Trigg modern submersible water bore and the reticulation now working with crystal clear water.

 

If your water bore needs repair call us on 9246 0111 or we will call you

Fix or Replace Old Style Well

We were called out to a customer in Wembley to repair their old style well. You can normally recognize these as they have a tin lid.

Our specialist servicemen found the well was drawing sand because the screen below the ground had collapsed.

It was decided to replace the old well and centrifugal pump after many years of faithful service with a modern submersible water bore.

You will see in this vision how the sand is flushed out of the reticulation pipes with crystal clear bore water from the modern submersible bore.

A submersible bore only has a 10 by 10 inch lid which can be dropped below the lawn or garden or even the driveway. It is invisible and silent from the surface.

If you have been thinking about a water bore for your home in Wembley or the surrounding areas of Wembley Downs, City Beach or Floreat call us on 9246 0111 or visit our website HERE

Do I repair my old style well?

You will see many old style wells with a tin lid around Perth. Many are up to 70 years old and some have been dug by the home owner in the ’50’s and ’60’s.

My father dug the well for our family home in Applecross and it is still working.

Applecross bore repair
This old well-style bore is still limping along but will eventually need replacing. A submersible bore will be the way to go.

Many older Perth well style bores still giving faithful service after years of pumping bore water to the garden. Our specialist service team can keep them ticking over with a few industry tricks, priming solutions and centrifugal pump replacements.

Call us on 9246 0111 and we will talk you through the repair of your water bore well style or book a bore service HERE

Sadly though sometimes they are beyond economical repair and need to be “retired”. The best solution can be replacing with a modern submersible bore. Submersible bores have a small green lid which is usually ‘hidden’ under the lawn or garden. Submersible pumps are silent and very economical.

Call Virgin Bores to discuss a new submersible bore for your home and ask us how will it work, how long it will take and how economical will it be. Want to get an idea of cost for a new water bore at your house click HERE

Water Bore Repair Floreat

This week our specialist bore electrician, Dave, called on a customer in Floreat reporting their submersible motor was tripping the circuit breaker in the meter box.

Dave found the one horsepower 2 wire submersible motor was not fused and the windings appeared intact but there was a complete dead short to earth.

garden bore Floreat
The retic controller turned on the 2 wire submersible bore via a 24v relay in this Floreat bore

At a minimum the submersible motor needed replacing but given the age of the unit it was decided to replace the wet-end (pump) as well and down hole electrical cable and stainless steel draw wire. Our submersible pump installer, Adam, will attend and install the new pump and motor and cables down the bore hole. There was no electrical junction box at the bore head so in this case Dave will return and one will be added for easier servicing in the future.

Dave  found the bore head under a hedge  near the letterbox.  nice detective work Dave!

submersible garden bore floreat
Well done Dave finding the submersible bore under that hedge,

It was great we were able to help with repair to this Floreat water bore so the garden would be ready for summer.

If you live in Floreat and need your water bore or reticulation repaired call us on 9246 0111 or enquire online HERE 

Good Reviews Water Bore & Reticulation Perth

Are you looking forward to spending some quality time in the garden this summer?

Flower

Well the good news is spring will be with us shortly in Perth. Now is probably a good time to test your reticulation and water bore to make sure you are ready.

The phones are getting busier with Perth customers looking for repair and service of their water bores and reticulation.

Peter let us know this week  “used them twice and always amicable and do a great job”

Lots of Perth people are installing new water bores and saving money. After Lee had a water bore installed he told us “Just had one put in and they did a great job”

If we can help you get ready for summer call us on 9246 0111 or go to our website HERE

Water bores save money
Savings money with a water bore

Bore Repairs Dalkeith

Our mobile service teams are ready to repair your bore, bore pump or reticulation, in Dalkeith, Nedlands and Claremont.

If you have a problem with your bore or reticulation system give us a call on 9246 0111 and we will get you back up and running promptly.

For more information on the repair and service of your bore or reticulation in the western suburbs of Perth check out our website HERE

Our bore electrician will test diagnose and repair any electrical faults. We specialise in replacing fused or burnt out bore pump motors which may be the subject of an insurance claim.

We repair anything to do with water bores or reticulation sprinkler systems including replace reticulation controllers.

We are a family owned business and have been around for nearly 20 years and can be relied upon to look after your water bore and retic needs.

New water bore Mount Lawley

We have drilled a lot of successful water bores in the Mount Lawley area over the years and we know the area well.

Next week we will drill another water bore in Mount Lawley itself right on the hill. The water bore is an important part of  new landscaping at the property.

The start of water bearing ground at this Mount Lawley property is around 26.8 metres below ground.  We will drill to 39 metres, 12 metres below the water table to help ensure optimal supply.

We have been drilling and repairing water bores in the Mount Lawley for over 16 years.

We have specialist repairers and bore electricians ready to help with any bore service or repair issues with any brand of bore or bore pump.

Check out the Virgin Bores website HERE or phone on 9246 0111 and chat with Dave or Troy

Drilling a water bore in a new garden in Moutn Lawley
Planning for drilling a modern submersible bore in Mount Lawley