Tag Archives: groundwater

New Water Bores, Uncategorized

New Water Bore Rossmoyne

 

Watching this video you can see this new Rossmoyne Water bore is gushing with water and there is only a small pile of sand from the water bore drilling process for this 18 metre submersible water bore in Rossmoyne.

It was drilled  with the portable drilling rig in the Rossmoyne backyard because there was restricted access. Groundwater was encountered at only 4.5 metres down.

Here we see the bore being flushed as groundwater is forced to the surface by compressed air alone. At the same time the “mud tank” is being given a clean. It was used for the recirculating drilling fluids during rotary mud drilling.

Drilling New Bore

The next thing we will install the submersible pump and connect to the retic system.

We will also specialist in repairing your Rossmoyne water bore or reticulation

If you live in Rossmoyne or surrounding areas like Shelley or Willeton call 92460111 or find out more about what is involved in drilling a water bore in the Perth suburbs  HERE

Bore Perth, Clear bore water, New reticulation system, New Water Bores, Reticulation systems, ReticulationPerth, Water bore

Applecross Water Bore

We drilled a modern submersible water bore in this Applecross home. They called us on 9246 0111.

That was in 2015 and we talked through the ideal specifications for their Applecross home. We drilled the water bore to a depth of 27 metres. We used a 1.1 kilowatt single phase submersible pump in this Applecross submersible water bore.

Earlier this year we designed and installed a new reticulation system for this Applecross home using an internet wifi reticulation controller. If you are in the Applecross area and would like to replace you old retic system we can design and install a new reticulation to fir all your needs.

Check out the wi-fi internet controller on our website.

wi-fi internet reticulation controller

Look how fabulous their Applecross lawn looks at the moment.

Green lawn with submersible water bore Applecross
Lush lawn with submersible water bore Applecross

If you have a home in Applecross or the surrounding areas of Ardross, Mount Pleasant or Bateman give us a call on 9246 0111 or if you would like to read more about a new water bore in the Applecross area HERE 

We also service and repair the submersible water bores for our many clients in the Applecross area.

img_1194

Bore Perth, Members ADIA & IAA, New Water Bores

Drilling water bore in driveway

1 Comment

We installed a new submersible water bore for a client who knew there would be problems with access for the water bore drilling rig. All suburbs 9246 0111. 

We couldn’t use any of our portable or smaller drilling rigs because the ground was mainly limestone. We knew from experience the limestone would go all the way down to his required depth of 28 metres and it needed the power of our truck mounted drilling rigs to be drilled successfully.

Tight access drilling
Neat hole in drive way ready for bore drilling

There were large brick walls around the entire property so the only option was to drill the bore in his driveway. Normally a simple job to drill a bore in a driveway if it is paving. Then we simply lift pavers, drill the bore, install and connect the submersible pump and then replace the pavers. But this driveway was poured aggregate. Customer was determined to get a bore. Solution…we arranged a contractor to cut a neat circular hole in the aggregate driveway.

Water bore drive way cut out
Water bore driveway cut out

We preserved the circular cut out. After bore drilling and installation this same cut out plug shown here was put back as the lid over our bore box. 

It was a very neat solution. Ring us with your Perth water boring challenge on 9246 0111 or read more about getting a modern submersible water bore here.

Bore broken, Bore repair

Perth Bore Service and Maintenance Cranks Up

Leave a comment
deep submesible pump repair Perth
Pulling up a deep submersible pump for repair.

Most bores work seamlessly for many years with no problems  start but there are sometimes some with problems. Common Perth bore faults include,

  • Old wells that have lost prime.
  • Submersible pumps that won’t start.
  • Bore circuit breakers that trip or fuses that are blown.
  • Reticulation controllers that are not working.
  • Blown bore pump start capacitors.
  • Electrical faults.
  • Pump motor fusion (often covered by insurance).

Whatever your bore problem no doubt we have seen it before as we have been in the business for nearly 20 years and are very experienced in bore repair in Perth.

Water Bores & Reticulation all suburbs Perth
Reticulation & Repairs Perth 9246 0111

Phone us for free telephone advice on 9246 0111   or to book a bore service visit. Read further at our Bore Troubleshooting Guide or visit our main website here.