Tag Archives: perth

Old Bore Well Needs Repair Dianella

Jeremy from Dianella phoned us this week saying that the pump on his old style bore well was tripping and was in need of repair.

Our specialist water bore electrician was the man for the job! There was one well liner and it was in the back yard. Most of the bores in the lower lying parts of Dianella are quite shallow. Some up on the hill can be very deep!

old bore Dianella repaired
The isolation switch on the side of this bore well was faulty.

Although the three phase centrifugal pump motor tested OK there was a dead short between phases and the isolator had burnt out wiring.

Bore pump fixed Dianella
This bore pump isolation switch in the well was the culprit

Dave replaced the isolator and renewed all the wiring and the bore pump is working again.

If you have a bore problem and need to get an old style well with a tin lid repaired call us on 9246 0111 or visit our website HERE

Fix bore Greenwood

David from Greenwood phoned us on 9246 0111 last week. We have installed and repaired many modern submersible water bores in the Greenwood, Madeley, Marangaroo and Warwick areas. His submersible pump motor was tripping.

We will talk your problems through on the phone and send the right tradesman so we can fix your modern submersible bore quickly and economically.

In this case we sent Dave our specialist water bore electrician. He has worked on literally thousands of water bores across the Perth metro area.

Greenwood water bore needs repair
Faulty water bore Greenwood

The customer’s  2 wire submersible motor was completely seized, when running it was drawing over 42 amps. It was a totally manual operation with plugs into an adjacent water proof power point which is fed by its’s own circuit breaker/RCD in meter box. All the other bore electrics tested OK.

Modern submersible water bore repaired
Greenwood water bore repair

So we returned to fit new barrel union, new cable down hole and new submersible pump wet-end.

David from Greenwood’s bore and retic are now ready for summer. How about you?

Call Troy on 9246 0111 or book a bore service HERE

 

Repair Water Bore Reticulation Mosman Park

We had a call from a client in Mosman Park to say that her bore and reticulation was not working.

Our bore electrician attended  promptly and found that the start box was tripping due to a faulty bore start capacitor. The 50 MF faulty capacitor was replaced and all is working on both reticulation stations again.

The capacitor shown in pic had clearly evident grey “gunk” oozing out the bottom. Sometimes this is black.

Bore repair Mosman Park
Note the grey “gunk” oozing from this ruptured bore start capacitor

Often even an external smell test of the bore start box reveals a tell tale burnt smell when a capacitor has ruptured like this.

Faulty capacitor replaced by bore electrician
Replaced faulty capacitor

We informed our Mosman Park client some of the sprinklers were broken and more repair work was required.

If you are in the Mosman Park area or the surrounding areas of Cottesloe and North Fremantle and need prompt bore or reticulation service or repair call Troy on 9246 0111 or go to our website HERE

Centrifugal Pump Motor Broken Thornlie

The centrifugal pump motor down this well in Thornlie is seized up mechanically.

Thornlie Blog 1

Our specialist bore electrician, Dave, reported it was drawing over 52 amps. The Thornlie pump motor is one well liner down in the backyard if the Thornlie house.

We will now send another member of the team to replace the centrifugal pump and replace the blown fuse wire.

This Thornlie resident will soon be ready for summer.

If you have an old-style well we are the people to repair it! So if you are in the Thornlie area or the surrounding suburbs of Langford or Parkwood call us on 9246 0111.

If you want to save money and have the lushest garden in the street do some boring research here

Building New Home Water Bore Perth

If you are building a new home in Perth – consider a water bore. It will save you thousands of dollars.

We are quoting for a client who is about to build a new home in Shelley. We are quoting for drilling, a stainless steel submersible .75 KW pump and motor and the down hole electrics for a 10 to 13 metre bore. The start of the water bearing ground is at about 2 metres.

We suggest to drill and case prior to the completion of the building and site cleanup. Avoids mess, driving on a new driveway and avoiding any problems with new front walls. We are also choose a spot that will not be built over which is ideal for ongoing access to the bore head.

We will liaise with the builder on the location of the bore. In the case of this new bore in Shelley the builder wanted to know what the bore would look like at the surface and we sent them this picture,

Bore Head .jpg

We have drilled a lot of successful bores in Shelley over the years and know the ground water well and will design this bore to industry best practice with no shotcuts!

If you are building a new home and would like to talk to an expert about a new bore call Troy on 9246 0111 or get an online quote HERE

Fix shared bore Mindarie

The phones are hotting up with Perth gardeners getting ready for another beautiful summer in the best city in the world!

bore repair Mindarie
This Mindarie bore box lid was flush with the lawn

We had a call last week from a Mindarie resident whose water bore needed repair.

It was a shared bore with a neighbour and they were keen to get it fixed pronto. Sharing a water bore is a great idea as it halves the costs. More shared bore info here.

Our specialist bore electrician, Dave, attended and tested and found the 1.1 KW submersible motor was fused.

He made a number of recommendations. Replace the bore cable down the hole, renew the junction box at the top of the bore, rewire bore to house and replace the submersible motor, start box and wet-end (pump). Mindarie-2-.jpg

Troy forwarded this Mindarie customer the details of what was needed to have a flourishing sea side garden this summer.

Call Troy on 9246 0111 or check out our clear and informative website HERE

Water Bore Repair Floreat

This week our specialist bore electrician, Dave, called on a customer in Floreat reporting their submersible motor was tripping the circuit breaker in the meter box.

Dave found the one horsepower 2 wire submersible motor was not fused and the windings appeared intact but there was a complete dead short to earth.

garden bore Floreat
The retic controller turned on the 2 wire submersible bore via a 24v relay in this Floreat bore

At a minimum the submersible motor needed replacing but given the age of the unit it was decided to replace the wet-end (pump) as well and down hole electrical cable and stainless steel draw wire. Our submersible pump installer, Adam, will attend and install the new pump and motor and cables down the bore hole. There was no electrical junction box at the bore head so in this case Dave will return and one will be added for easier servicing in the future.

Dave  found the bore head under a hedge  near the letterbox.  nice detective work Dave!

submersible garden bore floreat
Well done Dave finding the submersible bore under that hedge,

It was great we were able to help with repair to this Floreat water bore so the garden would be ready for summer.

If you live in Floreat and need your water bore or reticulation repaired call us on 9246 0111 or enquire online HERE 

Good Reviews Water Bore & Reticulation Perth

Are you looking forward to spending some quality time in the garden this summer?

Flower

Well the good news is spring will be with us shortly in Perth. Now is probably a good time to test your reticulation and water bore to make sure you are ready.

The phones are getting busier with Perth customers looking for repair and service of their water bores and reticulation.

Peter let us know this week  “used them twice and always amicable and do a great job”

Lots of Perth people are installing new water bores and saving money. After Lee had a water bore installed he told us “Just had one put in and they did a great job”

If we can help you get ready for summer call us on 9246 0111 or go to our website HERE

Water bores save money
Savings money with a water bore

Water Bore Reticulation The Vines

Today we had a number of calls from customers in the Perth metropolitan area wanting their reticulation repaired. These included a sprinkler shooting straight up in the air, a customer looking for two solenoids in their front yard and sprinklers working intermittently. Our service teams are on the road and can fix your reticulation quickly, efficiently and economically – 9246 0111.

It has been a busy week for us in The Vines area. Our installation teams this week  drilled a 19 metre bore throughout silty clays. The Vines can be a challenging area for water bores but we got a good supply of groundwater.

If we can help you with installation or repairs of a water bore or reticulation in the Vines or the surrounding areas of Ellenbrook or Aveley call us on 9246 0111 or go to our website HERE

 

Reticulation and Water Bore Perth

Our specialist water bore electrician Dave
Dave our specialist bore electrician

 

As the weather starts to improve Perth people start testing their reticulation and water bores getting ready for summer. Today we had calls from Manning and City Beach from customers whose reticulation needed repair. Call us on 9246 0111 to get your water bore or reticulation ship shape for spring/summer.

This week there was lots of blue sky and it was a beautiful day  when Dave our electrician and Jack our serviceman were working hard to connect a recently drilled submersible bore to this new home. A bit of surface limestone would trouble mere mortals but Dave will triumph!

If we can assist with repair or installation of a water bore or reticulation call us for a chat on 9246 0111 or go to our website HERE