Chris lives in Gosnells and his modern submersible water bore 2 horsepower 3 phase motor was tripping.
We sent in our specialist bore electrician Dave to test the motor and it tested fusion.
As you can see the bore head has a large gate valve so it took a bit of digging and mucking around.
Adam then returned and replaced the 1.5 KW 3 phase motor, wet-end and cable.
Dave then returned and fitted new junction box. He ran and tested and all OK
Thanks so much to Chris for the following review. We are a family run and have been in the business for nearly 20 years and love to look after our customers,
Our service teams have fully stocked vans and are on the road ready to repair your modern submersible bore or reticulation systemsĀ in all Perth suburbs.
Our specialist service team was fully stocked for this job to replace an eight station controller in the beautiful Perth coastal suburb of Hillarys.
Retic controller needs replacing
We replaced this 8 station controller for new and programmed the new controller for the client at 6am three days a week. The client has a water bore so is able to water their garden and lawn 3 days a week whereas householders on mains water can only water 2 days a week.
Hillary’s retic controller
If your reticulation controller needs replacing give us a call on 9246 0111 for prompt and economical service orĀ we can call you
Mel asked us to look at the modern submersible water bore at his son’s house south of the river in Leeming.
Leeming submersible water bore
We sent our specialist bore electrician Dave to do a range of tests to work out the problem. He tested the single phase two wire submersible motor and found it was fused. The motor start winding is damaged by rupture of internal capacitor.
In some cases a fused motor can be claimed on the householders insurance.
Our service teams will return to replace the motor so the householders bore and reticulation will be up and running.
Mark from Tapping phoned us on 9246 0111 to say his bore was not working.
We sent our specialist bore electrician Dave to test the single phase two wire motor which tested OK. Good news!
Top of Tapping water bore
He found the 24 volt relay was faulty and replaced it for new. All is working again on 3 stations with all readings OK.
Tests OK after relay replaced
If you live in the Tapping area or the surrounding suburbs of Wanneroo, Banksia Grove or Joondallup and your modern submersible water bore or old well is not working and needs repair call us on 9246 0111
FYI (source Wikipedia)
Tapping is a suburb of Perth, Western Australia, located within the City of Wanneroo. It came into being in the early 1990s as a subdivision of Wanneroo, originally as part of the Carramar estate. Tapping was chosen as the suburb name in honour of an early settler family in the Wanneroo area. Mr William Tapping arrived in 1886 and Molly and Dolly Tapping were long time Postmistresses in Wanneroo. The name for the suburb was approved in 1997.
Dave our specialist bore electrician attended a job in Queens Park where it was reported the centrifugal pump for an old well wasn’t working.
The single phase Davey Boremaster tested OK so he replaced the 30 mf capacitor for new and the water bore is working again.
However he did note on his report that there were distinct mechanical sounds and he was not sure how long the pump would last before it fails mechanically.
If your old well water bore needs repair and you are in Queens Park or the surrounding areas of Welshpool, Cannington or Bentley call us on 9246 0111 or check out our website
Often we get called to bore pump problems where customers have been told by someone, even by electricians, that the problem “must be the pump” and it needs replacing.
There can be a vast number of reasons why your water bore is not working. If you call on 9246 0111 we will talk you through the problem over the phone. We will then send the correct person to diagnose/fix your water bore.
If we think it is an electrical problem we will send one of our specialist bore electricians.
Our specialist electrician fixing water bore
It can be hard for the inexperienced to diagnose bore pump faults particularly with submersible pumps. Often though we find on closer examination it is a control equipment or wiring issue. Our specialist bore electrician tracks down faults and repairs bores, retic and pumps on a daily basis. We have the correct diagnostic equipment and years of experience so we will save you time and money.
Our mobile service teams do prompt repairs to ALL TYPES of Water Bores & Reticulation Sprinkler Systems Perth metro-wide. Free phone advice. Our experience saves you time and money. Bore repair HOTLINE 1300 734 300 North of River: Troy 0408454130 South of River: Brett 0411511611
You must be logged in to post a comment.