Tag Archives: electrical

Master solenoid valve, Uncategorized

Fix Master solenoid valve Wanneroo

Craig is one of our reticulation service team and he had had fun at this job in Wanneroo 9246 01121.

We took some time to locate and fix this master solenoid valve at the Wanneroo home of one of our customers. Fortunately the householder had a plan of their reticulation system, it saves a lot of time and money.

Surprisingly common to also find such a corroded manual gate valve that isolates the retic from the mains water supply which is often just near the water meter.

Master solenoid Wanneroo
Master solenoid

Nice work Craig!

We service reticulation and sprinkler systems from both mains water and submersible water bores. If you are in Wanneroo or the surrounding areas of Sinagra, Heathridge or Wangara we repair and fix bores and reticulation daily. Our mobile teams will be in the area and if we can help you call on 9246 0111 or find out more about finding and fixing solenoids HERE

Bore Perth, Water bore

Heathridge Water Bore

It took us two days to drill this deep submersible water bore in the Heathridge area.

We drilled this Heathridge submersible water bore to 55 metres. It was slow as we were drilling through limestone. We drilled this Heathridge bore on the top lawn near house.

Then we installed the submersible pump and our retic team will install a full reticulation system in the coming days.

We can take care of the whole process for you. Drilling a new water bore and installation of a new reticulation system. As we have been in business nearly 20 years we then care of any bore or reticulation service and repair for our customers.

If you would like a modern water bore in the Heathridge area call on 9246 0111 or do some research HERE

 

Bore Perth, Clear bore water, New reticulation system, New Water Bores, Reticulation systems, ReticulationPerth, Water bore

Applecross Water Bore

We drilled a modern submersible water bore in this Applecross home. They called us on 9246 0111.

That was in 2015 and we talked through the ideal specifications for their Applecross home. We drilled the water bore to a depth of 27 metres. We used a 1.1 kilowatt single phase submersible pump in this Applecross submersible water bore.

Earlier this year we designed and installed a new reticulation system for this Applecross home using an internet wifi reticulation controller. If you are in the Applecross area and would like to replace you old retic system we can design and install a new reticulation to fir all your needs.

Check out the wi-fi internet controller on our website.

wi-fi internet reticulation controller

Look how fabulous their Applecross lawn looks at the moment.

Green lawn with submersible water bore Applecross
Lush lawn with submersible water bore Applecross

If you have a home in Applecross or the surrounding areas of Ardross, Mount Pleasant or Bateman give us a call on 9246 0111 or if you would like to read more about a new water bore in the Applecross area HERE 

We also service and repair the submersible water bores for our many clients in the Applecross area.

img_1194

Bore Perth, New reticulation system, Uncategorized

New reticulation system Noranda

 

If you would like a modern submersible water bore or a new reticulation system in the Noranda area call 9246 0111.

We drilled a new submersible garden water bore here last week at this house in Noranda, now we have installed a new reticulation system. With the extra flow from the bore versus mains scheme water, we were able to run pop up sprinklers for the lawn on one station and separate micro sprays for the garden beds on another. The half sprinklers that face the house backing onto the curb are prone to car tyre damage. So we installed come concrete surrounds to this line of sprinklers and those on the edge of the driveway to protect this new Noranda reticulation system.

New retic & bore Noranda
New reticulation system Noranda

With the installation of a modern submersible water bore, the client is now able to use their sprinkler system three days a week instead of only two days allowed from mains water. This Noranda front garden is about to have a new lawn laid. They will be able to apply for a new lawn exemption and water the new lawn more often details here

While we were there, we popped our head over the side fence and took a look at the neighbor’s garden. We drilled new submersible water bore at the property last year and their garden looked great. We are very happy to get referrals from happy customers.

If you live in the Noranda area and would like to discuss a new water bore or reticulation system call us on 9246 0111 or check out our website HERE

 

Bore Perth, Members ADIA & IAA, New Water Bores

Drilling water bore in driveway

1 Comment

We installed a new submersible water bore for a client who knew there would be problems with access for the water bore drilling rig. All suburbs 9246 0111. 

We couldn’t use any of our portable or smaller drilling rigs because the ground was mainly limestone. We knew from experience the limestone would go all the way down to his required depth of 28 metres and it needed the power of our truck mounted drilling rigs to be drilled successfully.

Tight access drilling
Neat hole in drive way ready for bore drilling

There were large brick walls around the entire property so the only option was to drill the bore in his driveway. Normally a simple job to drill a bore in a driveway if it is paving. Then we simply lift pavers, drill the bore, install and connect the submersible pump and then replace the pavers. But this driveway was poured aggregate. Customer was determined to get a bore. Solution…we arranged a contractor to cut a neat circular hole in the aggregate driveway.

Water bore drive way cut out
Water bore driveway cut out

We preserved the circular cut out. After bore drilling and installation this same cut out plug shown here was put back as the lid over our bore box. 

It was a very neat solution. Ring us with your Perth water boring challenge on 9246 0111 or read more about getting a modern submersible water bore here.

Bore electrician, Bore Repairs & Service, Start capacitor

Water bore start capacitor problem

We often get water bore repair calls where the problem turns out to be the start capacitor. Call on 9246 0111. 

Water bore start box and capacitor
Start capacitor and start box
Start capacitor in start box
Start capacitor in start box

In a single phase submersible bore pump the start capacitor is ordinarily in the 240 volt start box. Three phase submersible pumps do not have start capacitors. In some centrifugal pumps the capacitor can be mounted externally on the pump motor housing. It is surprising how often a faulty capacitor is missed as the cause of a bore pump problem particularly when tests are carried out by someone who is not specifically experienced in bore pump service work. Even trained general electricians can misdiagnose this simple problem.

Often a capacitor problem can spotted visually as it will commonly swell or rupture. A start capacitor should be perfectly cylindrical. Sometimes though a faulty capacitor can only be diagnosed by the serviceman actually testing it when disconnected. As the start box is mains powered it does need a licensed electrician or certified electrical worker to test and replace the start capacitor. Our specialist bore electrician Dave is expert at this. 

Burnt out start capacitor
Close up burnt bore start capacitor

One of our clients from Baldivis sent us these pics of inside his submersible water bore start box.

This is a single phase start box and is a particularly dramatic example of a blown start capacitor.

Burnt bore start capacitor Perth
Burnt bore start capacitor in start box

Our mobile bore service teams carry a variety of different size start capacitors and can quickly diagnose and fix this common bore problem. We repair water bores in all Perth suburbs, call us on 9246 0111 or book a service online

Bore electrician, Electrical Problems

Electrical bore problem Beechboro

Leave a comment

Our specialist bore electrician recently fixed a circuit breaker that was tripping in Beechboro. Call 9246 0111.

Dave, our electrician, tested the single phase submersible pump and all the electrical tests were OK but were marginal on this Beechboro water bore.

There was an old metal start-box which was rusted out and dangerous. He replaced and rewired the start box with a new 1.5 kw rated box with matching start capacitor. Dave replaced some dangerous connections at the bore head and retested everything. Given the apparent age of the submersible pump it will likely need replacing in the next few years. We have recommended that at that time the down hole electrical cable and stainless steel draw wire is also replaced.

Dave is an excellent bore electrician and ask him why one of our customers called him a “little treasure”

We have a wealth of experiencing servicing bores and pumps throughout Perth. Give us a call on 9246 0111 or visit HERE  for more information or if we can help you.

Water Bore Drilling and service
Reticulation and drilling Perth

 

Bore Perth, New Water Bores

New bore Wilson

Leave a comment

Our Virgin Bores team have just finished installing a new submersible water bore in Wilson. This one we drilled to 19 metres at a newly completed house.

We backed the drilling rig truck up to the small perimeter wall and were able to drill “over” the slim high wall. The new bore is just behind the Virgin Bores sign on the other side of the wall. Note the small pile of sand resulting from drilling a 100mm diameter borehole to a depth of 19 metres. Water bearing ground was encountered at 5 metres.

Solenoid valves Wilson
A manifold of solenoid valves
Ready for retic in Wilson
New bore ready for retic in Wilson

This is pretty standard for Wilson. We installed a 1.5 horsepower (1.1 kilowatt) stainless steel submersible pump and Italian Sumoto motor. Included in this clients bore package was a 6 station Rainmaster reticulation controller. We then installed 4 solenoid valves in the ground and automated them. The 4 solenoid valves are pictured here adjacent to the actual borehead. The borehead was then covered over by a small green bore box and buried under the sand. The solenoid valves will be covered by valve covers for access if needed. Our bore electrician wired in the controller to auto start the bore pump and operate the solenoid valves.

Now a very easy job for the client to finish the reticulation sprinkler system. If we can help you with a bore or retic work in Wilson or surrounds please call us on 9246 0111 or visit Virgin Bores here

bore saves money, Bores & Pumps, Members ADIA & IAA, submersible bore pump

What size is my submersible bore pump?

Leave a comment

Most submersible bores in Perth have either a 1.1 kilowatt ( one and a half horsepower), 1.5 KW ( 2 HP ) or 2.2 KW ( 3 HP ) motor connected to a matching pump ( “wet-end” ) We can answer any questions on your submersible bore on 9246 0111

If the motor is a single phase then ordinarily it will have a start box mounted near the electrical meter box. This often has the kilowatts or horsepower marked on the front. These pictures show the common Sumoto pump start box where the kilowatt selection has been indicated in black markers. This one is 1.1 kilowatt.

Sumoto pump start box
Sumoto pump start box
Sumoto start box for 1.1 KW bore
Sumoto start box for 1.1 KW bore

For a three phase motor the only reliable way to determine the motor size is to pull up the motor and pump.

We repair modern submersible bores in all Perth suburbs.

If you need help with your submersible bore pump or electrical bore repairs in any Perth suburb give us a call on 9246 0111 or go HERE to learn more about submersible bore pumps

Bore broken, Bore Repairs & Service, Bores & Pumps, Checking bore and reticulation for summer, Electrical Problems, Members ADIA & IAA, New Water Bores, Water bore Ballajura

New water bore Ballajura

Leave a comment
Water bore problem Ballajura
Stuffed water bore Ballajura

It was a busy day in Ballajura today. We got called to a couple of bore electrical problems which we sorted quite quickly. We couldn’t immediately help the last call though.

The gentleman had a submersible bore that was of dubious construction. Not only was the borehole itself drawing sand, something which incidentally does not happen if the correct screens and gravel packing is used, but also the submersible pump was stuck irretrievably down the bore hole. The submersible pump had been installed down the bore without a stainless steel draw wire. The owner had erected a tripod and attempted to retrieve the pump by hauling up the poly pipe on a block and tackle. Unfortunately the poly pipe had snapped some metres down the bore hole and the poly pipe and submersible pump were now completely stuck.

Next week we will be drilling a new water bore for him. We’ll be sure to do everything to best practice standards to avoid problems like this in the future. We suspect this original bore had been a DIY or at best done by a backyard operator. Make sure if you are having a bore drilled in Ballajura or surrounds you use a licensed driller and preferably one who is a member of the ADIA.

If you would like a quote on a new water bore or need repairs to your existing bore in Ballajura give Virgin Bores a call on 92460111 or visit http://www.virginbores.com.au