Tag Archives: electrician

Bore Perth, bore saves money, Coastal water bore Perth, Members ADIA & IAA, Water bore Sorrento

Water bore Perth Coastal Strip

Leave a comment

We drilled a new submersible water bore in this week for a customer in Sorrento 9246 0111.

After nearly 20 years in the “boring business” we have drilled many new water bores on Perth’s coastal strip.

The quality of the water at this Sorrento water bore was great. Salt levels perfect at 450 ppm. We drilled the bore in back yard via side gates as there was no access to front garden near electrical meter box.

Our electrician simply connected it up and over through the roof space. The number of stations on this retic system were halved when we connected the bore to accommodate the extra flow from the 1.5 hp submersible bore pump.

For an online quote on a new bore Sorrento or any of Perth’s coastal suburbs click HERE  or call us 9246 0111.

The job didn’t finish after the bore was completed. We then modified the garden reticulation system and added gear drive sprinklers to the verge.

Drilling rig drilling water bore Sorrento
Water bore being drilled coastal suburb of Sorrento
Uncategorized

Testimonial from customer for Mirrabooka Water Bore.

Leave a comment

Thanks very much for the good review from Jim for Virgin Bores.

Good review Virgin Bores
A customer says thank you for good service

We drilled Jim a water bore for him in Mirrabooka.

The water bore drillers did a 36 metre bore on a sloping block in Mirrabooka. The specialist electricians then connected the bore.

It is great to have a happy customer with his water bore in Mirrabooka.

img_6038

If you live in Mirrabooka or surrounding areas call us on 9246 0111 or check out our website HERE

We can install and repair water bores in the Mirrabooka area

Uncategorized

Old Submersible Bore Cable

Leave a comment

All submersible bores have electrical cable that goes down beneath the water table delivering mains power to the submersible pump (call us on 9246 0111)

It is important that the bore cable is sound and won’t allow water to get inside. Water ingress can lead to electrical failure of the motor or at best persistent tripping of the control equipment, circuit breaker or cause fuses to blow. Pictured is just part of this summer’s suspect or faulty electrical cable that has been replaced this year.

If you have a similar problem with your submersible bore our specialist water bore electricians have the experience, knowledge and equipment to diagnose the fault. Call us Perth metro wide 9246 0111 or visit our main website here

Different types of old electrical cable

We repair submersible water bores in any Perth suburbs. We are a family owned business and have been going in Perth for nearly 20 years.

Bore Repairs & Service, Bores & Pumps, Electrical Problems

Thanks Bore Electrician Kewdale and Pump Replacement Carine

Leave a comment

It is great to hear from happy customers and hear good reviews. Thank you! 9246 0111

Thanks for sending our specialist bore electrician to Kewdale
Thanks for sending our specialist bore electrician to Kewdale

Our experienced bore electrician Dave attended Russell’s Kewdale property, checked his system and supplied and fitted a new reticulation controller.

We also attended Philip’s Carine property where we replaced his .75 kw 2 wire submersible motor / pump and tested that everything was OK.

“Thank you for your teams excellent work just prior to Christmas. Having the bore operational again has been fantastic. Once again thank you and I am happy to recommend your services to anyone. Regards Phillip.”

If we can assist you with specialist bore electrical advise or pump replacement visit our website  HERE or phone Troy (ask him how his fishing is going) on 9246 0111

Bore Repairs & Service, Electrical Problems, Happy customer

Thanks for Fixing My Bore

Image Leave a comment

A good review for one of the team at Virgin Bores. As we say on our letterhead  “Thank you for the business – we appreciate it!”

Thanks for Fixing My Bore

Our service teams are on the road and fully equipped to fix your bore electrical problem quickly.

This happy Perth bore service customer had an electrical problem fixed quickly. If you have a bore repair needed at your Perth home call us on 9246 0111 7 days a week or   visit our main website here.

 

Bore Repairs & Service, Electrical Problems, Happy customer, Insurance claim

Insurance Claim on Fused Submersible Pump

Leave a comment
Submersible bore head electrician
Electrician working on Submersible Pump

If your submersible pump is fused it may be covered by your household insurance. Call us on 9246 0111.

We were happy to receive a handwritten note on Friday from a customer in Kardinya. We replaced his fused submersible pump motor and steered him in the right direction with his fusion insurance claim.

He said, “Thanks for fixing my submersible bore pump so promptly. I didn’t even know fusion might be covered under insurance“. Our electrician tested the motor and wrote it up as fusion.

If we can help you, 9246 0111 or visit our main website here for more water bore information

Bore Repairs & Service, Bores & Pumps, Electrical Problems, Uncategorized

Bore light stays on?

Leave a comment

Familiar call today from a lady who happened to live in Sorrento, but we get similar calls from bore owners all over Perth. “the light on my bore box on the wall has stayed on even after I have turned the reticulation controller off “.  This can turn in to a bigger problem so first things first, if you are reading this blog and your bore box light is on but there is no water pumping out anywhere please straight away turn the bore mains power off.  Turn it off by either turning off the circuit breaker ( or pulling the fuse) labelled “bore” or “pump” that you will hopefully see in your meter box. Or turn off the bore box isolation switch that is located on the bore box on the wall. ( this is called a bore start box, not to be confused with the reticulation controller). Worst case if you can’t turn it by either of these two methods then turn off your mains power master switch and call us pronto on 1300 734 300.

Lowara bore start box

What has most likely happened is that your automatic reticulation controller has correctly sent the 24 volt start signal to the relay in the bore start box and this has started the 240v bore at the same time as the reticulation controller has correctly sent a signal to open a solenoid valve allowing water to flow to the sprinklers. All good so far but then when the automatic reticulation controller has run through its cycle and shut the last solenoid valve the pump has continued to run. Most likely the start relay has stuck on and needs replacing. Prolonged operation of any bore pump with no water being able to flow (dead heading ) can cause a multitude of problems. Most commonly with submersible pumps the rising poly mainline will overheat and “blow”. With centrifugal well pumps overheating leads to several serious problems. Give our Perth bore service hotline a call on 1300 734 300 or visit our main website for more help on bores and reticulation.

Uncategorized

Bore Pump stopped working?

Leave a comment
Check the pump circuitbreaker or fuse.

Seems today was “D” Day with many Perth bore owners turning their water bores on for the first time this season….or should I say trying to turn them on. Calls today from Joondalup, Floreat, Landsdale, Safety Bay and Armadale all with a similar story. Either the pump cicuitbreaker was tripping ( or fuse blowing ) when the bore was turned on or nothing was happening at all. Some simple tests and solutions can be found in our Perth bore troubleshooting guide in this blog or call our Perth Bore Service Hotline    1300 734 300      Perth metro-wide    All Suburbs     We are specialists in both water bores and reticulation ( irrigation ) systems so whatever your problem we can fix it!