Tag Archives: electrician

Bore automation

Bore Automation Perth

We are automating an old bore in the southern Perth suburb of Shoalwater.

As pictured it is an old style well with a tin lid.

The sprinkler system is currently manually operated with five inground gate valves. This is common with these older style Perth water bores.

We can repair old style wells which have a tin lid
Inside of older style garden well in southern Perth suburb
Older style garden well

We will replace manual valves with 24  V solenoid valves which will be wired into a new reticulation controller. Our electrician will do the interface to start the bore automatically via a 24 V relay.

We do this type of Perth bore automation quite regularly with single station bore automations from as low as $750.

If you are in Perth and we can help you with a bore automation check out our website HERE or call one of our team on 9246 0111

Bore Perth, Members ADIA & IAA, New Water Bores, Water bore

Water bore in Yokine or Tuart Hill area

The Yokine area has many water bores
Water bores in the Yokine area

We sent a customer in Tuart Hill a quote several months ago for a new water bore at his home in Tuart Hill.

He kept the quote and recently contacted us asking if the quote was still current. We attended on site to discuss where we would drill and cut in to  exsisting reticulation.

The ground conditions call for a 39 metre bore. Water bearing ground is around 27 metres deep and we will drill 12 metres into water.

We have done many bores in the Yokine and Tuart Hill area so if you would like to discuss a water bore for your home call 9246 0111 or if you live in Tuart Hill and would like a new submersible water bore that would save you money get more details HERE

Bore Perth, Bore Repairs & Service, Bore Troubleshooting Guide, Uncategorized

Water bores in Two Rocks

We have vast experience in drilling and servicing water bores in the Two Rocks area and surrounds over the last two decades.

We have drilled dozens of bores stretching from Yanchep and Two Rocks across to Seatrees Estate and  Breakwater Estate. Bores in the area range from some shallow ones right near the coast at Yanchep and Two Rocks typically around 18 metres and up to 60 metres further inland near Seatrees Estate and Breakwater Estate.

In the smaller residential blocks in Two Rocks we normally install 1.1kw submersible pumps perfect for normal home gardens. In the 5 acre blocks over at Seatrees and Breakwater we would normally instal a 1.5 or 2.2 kw pump to give closer to 150 litres per minute.

All new drilling and installations are handled by our new Bore team at Virgin Bores.

For bore service and repair call Troy on 0408 454 130 or if you live in the Two Rocks area and you would like to discuss a submersible water bore look HERE

Water bores drilled and repaired in the Two Rocks and Wanneroo areas
Over 15 years we have drilled and repaired many water bores in Two Rocks
Bore Perth, bore saves money, Members ADIA & IAA, Uncategorized

New water bore for Booragoon

If you live in Booragoon and are interested in a modern submersible water bore call us on 9246 0111 for a chat.

Water bore and reticulation service
Water bore drilling & repair Perth

The customer has a lovely home but is yet to establish a garden! It is very smart to plan for a water bore at the early stages of planning a new garden.

At this Booragoon home we would drill the water bore to 30 metres using a stainless steel submersible pump and motor.

If you have any concerns about staining from a water bore call us to discuss and there are measures to mitigate the problem.

We have done 100’s of water bores in this area including Booragoon, Myaree and Melville. We would be keen to talk to you about a water bore at your Booragoon home. Call us on 9246 0111 or find more information on drilling a water bore at your home HERE

Drilling a submersible water bore in new garden in Booragoon
Water bore for a new garden in the Booragoon area
Bore Perth, Clear bore water, coastal water bores, Uncategorized

Woodridge Water Bore & Reticulation 

We have drilled many water bores in the Woodridge area and have experience in drilling deep water bores.

In general terms it takes us about a week to complete a Woodridge water bore with drilling, electrical and connection to your reticulation at your Woodridge property.

The depth to water in the area varies. Two of the water bores we have drilled in the area were 55 metres to water and 50 metres to water. Many people are interested in talking to us about a new water bore because they would like to save money.

We specialise in drilling these deep water bores in areas like Woodridge and Gabaddah.

Call us on 9246 0111 for a chat about a new water bore or repair of a bore and reticulation in the northern suburbs or get more information HERE .

 

Drilling a new submersible bore in Woodridge
We drill water bores in the Woodridge area
Water bore drilling in the Woodbridge area
The Woodbridge area
Members ADIA & IAA, New water bore Mount Lawley

New water bore Mount Lawley

We have drilled a lot of successful water bores in the Mount Lawley area over the years and we know the area well.

Next week we will drill another water bore in Mount Lawley itself right on the hill. The water bore is an important part of  new landscaping at the property.

The start of water bearing ground at this Mount Lawley property is around 26.8 metres below ground.  We will drill to 39 metres, 12 metres below the water table to help ensure optimal supply.

We have been drilling and repairing water bores in the Mount Lawley for over 16 years.

We have specialist repairers and bore electricians ready to help with any bore service or repair issues with any brand of bore or bore pump.

Check out the Virgin Bores website HERE or phone on 9246 0111 and chat with Dave or Troy

Drilling a water bore in a new garden in Moutn Lawley
Planning for drilling a modern submersible bore in Mount Lawley

Bore Perth, Clear bore water, coastal water bores, Uncategorized

New submersible water bore Watermans Bay

In May 2015 John rang us for a quote for a submersible water bore at a vacant block he had bought in Watermans Bay.

It is a lovely suburb sandwiched between the beautiful coastal suburbs of North Beach and Marmion and some pretty special sunsets.

Coastal water bore
We are drilling in the beautiful Perth coastal suburb of Waterman’s Bay

One of our team visited site and picked out the ideal location for the bore after viewing the plans for his Watermans Bay home.

Over two years later we are now drilling John his modern submersible water bore. We will be drilling a 30 metre submersible water bore based on the Department of Water data base. This should ensure optimal water quality for the coastal bore.

We were recommended to John by a neighbour and we are specialist in drilling water bores along the coast.

If you would like to talk to an expert about a water bore at your home call us on 92460111 or if you live by the coast and would like to discuss saving with a new submersible water bore there is more information HERE

Bore Perth, Water bore, Water bore Baldivis

New Bore Baldivis

A new water bore to be drilled at Baldivis home
The site for a new Baldivis submersible water bore

Today we are quoting on a new submersible water bore in the Badivis area. The Baldivis property is a couple of acres.

We are quoting a 40 metre submersible water bore which is suitable for the Baldivis property. We will install 100 ml slotted bore casing to the bottom 6 metres of this new submersible water bore and we will pack the slotted with drillers gravel to enhance the filtration.

The Baldivis borehole will be equipped with a high quality stainless steel pump and motor.

It is always a great time to look at a new subsmersible water bore for your home. Call on 9246 0111 or if you have a property in the Baldivis area and would like more information on a n ew submersible water bore look HERE

Members ADIA & IAA, New Water Bores, Water bore Balcatta

Submersible bore Balcatta

We are going to drill a submersible water bore for this client in Balcatta. We have been drilling water bores for homes in Perth for nearly 20 years. To discuss a water bore for Balcatta call us on 9246 0111.

We will be drilling to 28 metres.  Modern submersible water bores operate silently and are not visible from the surface covered by a small rectangular plastic lid.

The client has an existing old style well with a tin lid.  We have done the service and repair on the old well for many years for this long time customer and it has finally given up the ghost. The old well was in the back yard so we will be taking down a panel of fencing so we can use the existing electrical to save the Balcatta customer money.

If you would like a quote for a water bore we can design a new submersible water bore around your needs. Call us on 92460111 or if you would like free water at the flick of a switch check this out  HERE

coastal water bores, Members ADIA & IAA, Uncategorized

Marmion submersible water bore

​

 

​​This week we are drilling a new submersible water bore in Marmion.

The team normally make an early start. This video was taken at 8am and they had already drilled 20 metres of a 29 metre submersible water bore in Marmion.

The water table was reached at 18 metres. This submersible garden bore is for a new house and access restrictions mean we are drilling at the very front edge of the as yet unlaid sloping driveway.

We specialise in coastal suburbs like Marmion, Hillarys, North Beach and Trigg. We also service and repair water bores in Perth’s coastal suburbs. Get in touch if you would like a new water bore HERE  or phone David on 9246 0111

IMG_1017